Devcon® DFense Blok® Eliminates Abrasion in Coal Power Plant Chute Case Study

2023-12-15

●Problem:
■At a coal power plant, chutes are used to transport coal powder to the processing facility after crushing, screening, and pulverizing the raw material. Transportation of coal particulates was put to an abrupt stop when transfer chutes began to suffer high levels of wear and abrasion.
■The damage to the transfer chutes was caused by the buildup of coal dust containing corrosive and abrasive chlorides. The customer was seeking a durable epoxy coating that would restore and protect the equipment so the plant could maintain its high operating efficiency.
●Solution:
■The client turned to Devcon DFense Blok coating and epoxy sealer for its high performance and durability.
◆Devcon DFense Blok Surface Wetting Agent was applied to the surface of the chute as a primer, providing additional adhesion and bonding strength.
◆After applying the surface agent, Devcon DFense Blok was then mixed via a common jiffy mixer to achieve a final homogenous material of resin and hardener.
◆Devcon DFense Blok was subsequently applied on top of the primed surface of the chute.
◆The industrial strength epoxy was then smoothed with solvent to provide an easy to slide over surface that not only help with the wear reduction, but prevent raw material build up.

Devcon

coatingepoxy sealerSurface Wetting Agent

More

coal power plant ]transfer chutes ]

More

Case Study

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

October 2023

272 KB

- The full preview is over,the data is 2 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: