Devcon® DFense Blok® Repairs and Protects Cyclone Pipe Elbow at Aggregate Facility
Problem
At an aggregate processing plant, the inlet cyclone is used to slow down the flow of raw materials into the equipment and remove large rock. Handling a large volume of materials, the pipe elbow began to face high impact and sliding abrasion. As a result of not only the continual abrasive wear, but the corrosive liquids from the process, the pipes began to develop pinholes and leakage. These pipes needed to be repaired or replaced frequently, leading to high maintenance costs and prolonged shutdown.
Cyclone pipes
Solution
The customer selected the proven and highly durable Devcon DFense Blok® industrial strength epoxy coating to repair & protect the inside of the cyclone pipe elbow.
The pipe was removed from the top of the inlet cyclone, and all debris previously causing abrasive wear was removed.
The inside of the pipe was grit blasted to white metal to rid the surface of rust or any other contamination that could interfere with adhesion to the coating.
The inside of the pipe elbow experiencing the highest amount of wear was seamlessly coated with Devcon DFense Blok.
The equipment was then left to cure for a short period of only 5 hours, allowing for the pipe elbow to promptly be put back to use.
Worn pinhole leaks
Pipe elbow coated with Devcon DFense Blok
Project Outcome
Long-Term Protection
The Devcon industrial strength epoxy coating was applied to withstand the severe corrosive and abrasive conditions of the plant processes. Devcon DFense Blok held up to the abrasive environment where frequent high impact and wear from sliding raw materials would normally cause severe damage. As a result, the formation of pinholes was minimized and leaks were prevented with Devcon DFense Blok high performance coatings. The coated pipes were successfully returned to service.
- +1 Like
- Add to Favorites
Recommend
- Devcon® DFense Blok® Coating and Epoxy Sealer Eliminates Abrasion in Coal Power Plant Chute
- Devcon® Coatings Protect Surfaces from Impact and Reduce Equipment Downtime
- Introduction to Devcon® Epoxy Adhesives that Meet the Most Extreme Requirements
- Devcon® Floor Patch™ Coating Good as New, Even After One Year of Heavy-Duty Service
- Devcon® Wear Guard™ 300RTC High Chemical Resistance Coating Reduces Pump Repair Frequency at Platinum Mine
- Long-lasting Floor Protection with Devcon® Ultra Quartz™ Coating
- The Influence of Transmission Power of Industrial Router on Signal Strength
- Jowat Offers Precise Industrial Adhesives with High Initial Strength for Efficient Packaging Lines
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
