VOS615A Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current,SSOP-4, Half Pitch, Mini-Flat Package
●The VOS615A series has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4-pin 50 mil lead pitch mini-flat package.
It features a high current transfer ratio at low input current, low coupling capacitance, and high isolation voltage.
The coupling devices are designed for signal transmission between two electrically separated circuits.
●FEATURES
■High CTR with low input current
■ Low profile package (half pitch)
■ High collector emitter voltage, V-CEO = 80 V
■Isolation test voltage = 3750 V-RMS
■ Low coupling capacitance
■ High common mode transient immunity
VOS615A 、 VOS615AT 、 VOS615A-1T 、 VOS615A-2T 、 VOS615A-3T 、 VOS615A-4T 、 VOS615A-X001T 、 VOS615A-1X001T 、 VOS615A-2X001T 、 VOS615A-3X001T 、 VOS615A-4X001T 、 VOS615A-1 、 VOS615A-2 、 VOS615A-3 、 VOS615A-4 |
|
[ Telecom ][ Industrial controls ][ Battery powered equipment ][ Office machines ][ Programmable controllers ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SSOP-4 |
|
English Chinese Chinese and English Japanese |
|
17-Apr-13 |
|
Rev. 1.3 |
|
85373 |
|
289 KB |
- +1 Like
- Add to Favorites
Recommend
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- EPC Launches 2kW, 48 V/12 V DC-DC converter for More Efficient, Smaller, Faster, Bidirectional Converters for Mild-Hybrid Cars
- TT Electronics EBW5216 Busbar Shunt Resistors for High Current Measurements in The Hundreds of Amps Range
- How To Use An EPC Development Board to Evaluate The Performance of A Given GaN FET or IC in Common Applications?
- Stable Voltage Diode BZT52C16 - 16V Regulating Value, 500mW Power, SOD-123 Package
- How to Design a 2 kW 48 V/12 V Bi-Directional Power Module with packaged eGaN® FETs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.