P4SMA Series 6.8 To 600V 400W Surface Mount Transient Voltage Suppressors (TVS)
2023-11-09
●Description
■The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
●Features
■For surface mounted applications in order to optimize board space
■Low leakage
■Uni and Bidirectional unit
■Glass passivated junction
■Low inductance
■Excellent clamping capability
■Typical IR less than 5μA above 10V
■400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01%
■Fast response time: typically less than 1.0ps from 0 Volts to VBR min
■High Temperature soldering: 260°C/40 seconds at terminals
■Typical maximum temperature coefficient ΔVBR = 0.1% ×VBR@25°C× ΔT
■Plastic package has Underwriters Laboratory Flammability 94V-0
■Matte tin lead–free Plated
■Halogen free and RoHS compliant
■Typical failure mode is short from over-specified voltage or current
■Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
■IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
■ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
■EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
■The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
●Features
■For surface mounted applications in order to optimize board space
■Low leakage
■Uni and Bidirectional unit
■Glass passivated junction
■Low inductance
■Excellent clamping capability
■Typical IR less than 5μA above 10V
■400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01%
■Fast response time: typically less than 1.0ps from 0 Volts to VBR min
■High Temperature soldering: 260°C/40 seconds at terminals
■Typical maximum temperature coefficient ΔVBR = 0.1% ×VBR@25°C× ΔT
■Plastic package has Underwriters Laboratory Flammability 94V-0
■Matte tin lead–free Plated
■Halogen free and RoHS compliant
■Typical failure mode is short from over-specified voltage or current
■Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
■IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
■ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
■EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
- +1 Like
- Add to Favorites
Recommend
More>
- Nippon Chemi-Con Developed PMA Series SMD-Type Conductive Polymer Aluminum Solid Capacitors with Low-Profile Package and Large Capacitance
- Nippon Chemi-Con Developed Conductive Polymer Aluminum Solid Capacitors PMA Series with 1.4 Times Higher Capacitance
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- Nippon Chemi-Con Expanded PSG Series and PMA Series Conductive Polymer Aluminum Solid Capacitors with 25V High-capacitance Products and 35V Products
- Transient Voltage Suppressors for ESD Protection BLC03C-4, with 507 Watts Peak Pulse Power Per Line
- Transient Voltage Suppressor for ESD Protection BLC03C-4S Has Qualified in Accordance with the AEC standard Q101
- 600W Surface Mount Transient Voltage Suppressors SMBJ3V3A are Designed Specifically to Protect Sensitive Electronic Equipment
- PESD2510E Series Surface Mount Polymeric ESD Suppressor with a Ultra-low Capacitance of Only 0.05pF
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
