P4SMA Series Surface Mount – 400W
2022-08-15
●Description
■The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
●FEATURES
■400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
■Excellent clamping capability
■Typical IR less than 1μA when VBR min>12V
■Surface mount footprint for compact PCB layout
■Low profile package
■Typical failure mode due to exceeding maximum ratings is a short circuit condition
■Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A
■IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact)
■Built-in strain relief
■Fast response time: typically less than 1.0ps from 0V to BV min
■260oC/40sec change to 260oC/30sec
■VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT: Temperature Coefficient, typical value is 0.1%)
■UL Recognized epoxy meeting flammability classification V-0 change to Plastic package is flammability rated V-0 per UL-94.
■Meet MSL level1, per J-STD-020, LF maximun peak of 260°C
■Matte tin, lead–free plated
■Halogen-free and RoHS compliant
■Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin (Sn) (IPC/JEDEC J-STD-609A.01)
■The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
●FEATURES
■400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
■Excellent clamping capability
■Typical IR less than 1μA when VBR min>12V
■Surface mount footprint for compact PCB layout
■Low profile package
■Typical failure mode due to exceeding maximum ratings is a short circuit condition
■Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A
■IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact)
■Built-in strain relief
■Fast response time: typically less than 1.0ps from 0V to BV min
■260oC/40sec change to 260oC/30sec
■VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT: Temperature Coefficient, typical value is 0.1%)
■UL Recognized epoxy meeting flammability classification V-0 change to Plastic package is flammability rated V-0 per UL-94.
■Meet MSL level1, per J-STD-020, LF maximun peak of 260°C
■Matte tin, lead–free plated
■Halogen-free and RoHS compliant
■Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin (Sn) (IPC/JEDEC J-STD-609A.01)
- +1 Like
- Add to Favorites
Recommend
More>
- Very Fast Acting Fuse PICO® II Fuse Series, Designed for Battery Management System | Littelfuse
- New Littelfuse 400PV Photovoltaic Fuses Provide Rugged Circuit Protection for Next-Gen Integrated Solar Shingles
- Littelfuse Unveils SSA Series Current Shunt Resistor Solution for High-Performance Current Sensing
- Littelfuse EV1K Series Fuse First to Provide 1000Vdc Automotive Grade Protection for Next-Gen Passenger Cars and Commercial EVs
- Littelfuse Launches 1500 Volt Solar String Fuse and Holder Rated 35 to 60 Amperage
- Littelfuse New High-Voltage Cartridge Fuses 828 Series, AEC-200 Compliant with a 1,000 Vdc Interrupting Rating
- Littelfuse Completes Acquisition of C＆K Switches
- Littelfuse expands its fuse manufacturing operation in China, Cuting Customer Order Fulfillment Lead Time by Half
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
