SD025M331E15PKKKS00R Electrolytic Capacitors
●Leakage Current Test: 6.3V ~100V at 20°C for 2 minutes; 160V ~450V at 20°C for 5 minutes ;
●Operating temperature: 6.3V~400V -40°C~ +105°C ;420~450V -25°C~ +105°C ;
●Dissipation Factor Test: at 20°C, 120 Hz.
●Capactitance Test: at 20°C, 120 Hz.
●Ripple Current Test: at 105°C, 100K Hz ;
●Load Life: 2000 hours,subjected to DC voltage with the rated ripple current is applied at 105°C.
◆Capacitance Change: Within±20% of initial value;
◆tanδ: 200% or less of initial specified value; According to the specified value which stated in the catalogue to do the life testing;
◆Leakage Current: Initial specified value or less.
●Shelf Life: The following specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1000 hours 105°C without voltage applide. Before the measurement, the capacitor shall be preconditioned by applying voltage according to them 4.1 of JIS C5101-4.
◆Capacitance Change : Within±20% of initial value;
◆tanδ: 200% or less of initial specified value;
◆Leakage Current : Initial specified value or less.
●when have characteristic requested: Load life & shelf life test and etc. , judgment standard reference to our catalogue.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2023.05.11 |
|
|
|
|
|
|
|
|
455 KB |
- +1 Like
- Add to Favorites
Recommend
- Su’scon SMD-Type Electrolyte Capacitors with 4,700-µF Capacitance Tailored for High-Temperature, Low-Voltage Design Applications
- Su’scon Aluminum Electrolytic Capacitors, Designed for Automotive Electronics and Compliant with AEC-Q200 Standard
- 27.5~43.5GHz Bare Die LNA for Applications Such as 5G MIMO Antenna, SATCOM Links
- Diotec‘s RGL34J with an IFAV of 0.5A a VF＜1.3V and trr＜250ns can be used in the capacitive power supply unit such as light sensors
- Level Shift RS0102 Provides Dual Data Lines, Which Are Mainly Used for Communication Interfaces Such as UART, I²C, SMBus, and GPIO
- C series connectors can meet the requirements and preambles in Safety Critical Items such as rail braking systems
- RS0104 Level Conversion Chip Provides Four Data Lines, mainly Used for Communication Interfaces Such as SPI, I²S, Bus Interface
- Crocus Technology TMR Sensors such as CT430/1 Have the Most Reliable and Efficient Performance in Overcurrent Protection
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
