RS0104 Level Conversion Chip Provides Four Data Lines, mainly Used for Communication Interfaces Such as SPI, I²S, Bus Interface
Level shift and voltage conversion in the power supply system are two different function chips. The level shift is for the signal line level. For example, the GPIO port of the MCU has a working voltage of 3.3V, and the GPIO of the DSP is 1.8 V, the communication between them cannot be directly connected, and the level adaptation process is needed to communicate.
RS0104 level conversion chip provides four data lines, mainly used for communication interfaces such as SPI, I²S, bus interface, GPIO, etc., automatically recognizes the direction, and is compatible with push-pull output architecture and open-drain output architecture. Its main features are as follows:
●No need for data direction control
●The push-pull architecture supports a 24Mbps data rate, and the open-drain architecture supports a 2Mbps data rate
●A side supports 1.65V~5.5V, B side supports 2.3V~5.5V
●A and B side power supplies are isolated from each other
●No power-on sequence requirements
●Operating Temp. : -40℃~+85℃.
Fig.1 Typical application circuit diagram
It should be noted that the supply voltage of VCCA cannot be greater than VCCB, that is, side A is connected to the low-voltage system, and side B is connected to the high-voltage system.
RS0104 provides a variety of general packages, including TSSOP, QFN3.5x3.5 and QFN 2x2, and other packages to meet the compatible design requirements of different production systems.
Fig.2 Typical application circuit diagram
It should be noted that the supply voltage of VCCA cannot be greater than VCCB, that is, side A is connected to the low-voltage system, and side B is connected to the high-voltage system.
RS0104 provides a variety of general packages, including TSSOP, QFN3.5x3.5 and QFN 2x2, and other packages to meet the compatible design requirements of different production systems.
- +1 Like
- Add to Favorites
Recommend
- Runic Level Conversion Chips Won the “2021 China IC Design Achievement Award for the Best Amplifier/Data Converter“ Award
- Runic Technology Launches Eleven Automotive-qualified ICs Meeting AEC-Q100 Grade 1 and MSL1
- Jiangsu Runic Technology Won 2021 China Analog Semiconductor Outstanding Business Award
- Runic Technology Participates in the 2021 ASPENCORE Double Summit
- The RS3005 Chip Developed by Runic Technology Helped The System MCU to Complete The Power Supply
- Runic‘s OP Amp RS622,Analog Switch RS2105 and Low-Consumption LDO RS3236 Apply in Finger Clip Oximeter
- Level Shift RS0102 Provides Dual Data Lines, Which Are Mainly Used for Communication Interfaces Such as UART, I²C, SMBus, and GPIO
- Runic OP Amp RS8551, LDO RS3002 and RS3226 Series Apply in Hand-Held Infrared Thermometer Detector
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.