TMI8870 TMI8870B TMI8870/B 3.6-A Brushed DC Motor Driver

2022-11-07
●GENERAL DESCRIPTION:
■The TMI8870/B devices are the brushed-DC motor drivers for printers, appliances, industrial equipment, and other small machines. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current. The inputs can be pulse width modulated (PWM) to control motor speed, using a choice of current-decay modes. Setting both inputs slow enter a low-power sleep mode.
■The TMI8870/B devices feature integrated current regulation, based on the analog input VREF and the voltage on the ISEN pin, which is proportional to motor current through an external sense resistor. The ability to limit current to a known level can significantly reduce the system power requirements and bulk capacitance needed to maintain stable voltage, especially for motor startup and stall conditions.
■The devices are fully protected from faults and short circuits, including UVLO,OCP,and TSD.
●FEATURES:
■H-Bridge Motor Driver Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads
■Wide 6.8V to 45V Operating Voltage
■3.6-A Peak Current Drive
■PWM Control Interface
■Integrated Current Regulation
■Low-Power Sleep Mode
■VM Undervoltage Lockout (UVLO)
■Overcurrent Protection (OCP)
◆Retry After OCP: TMI8870
◆Latch After OCP: TMI8870B
■Thermal Shutdown (TSD)
■Automatic Fault Recovery
■ESOP8 Small Package and Footprint

TOLL

TMI8870TMI8870B

More

Part#

Brushed DC Motor Driver

More

Printers ]Appliances ]Industrial Equipment ]Mechatronics ]

More

Datasheet

More

More

Please see the document for details

More

More

ESOP8

English Chinese Chinese and English Japanese

2022.05

V1.3

1.9 MB

- The full preview is over. If you want to read the whole 12 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: