Integrated DC Motor Driver: The Current Is Only 15μA In low-power Sleep Mode
The TMI8150 is an Integrated DC Motor Driver, applied to a low input voltage working system. The TMI8150 uses serial communication to control 5 channels of motors, which supports PTZ motor and IR cut filter change the motor. 1~4CH can drive 2 stepper motor of PTZ (X andY axis), X-axis and Y-axis are controlled by orthogonal SPWM and support forward and reverse rotation. 5CH control IR-cut. The current consumption can be held at quite a low level during standby or operation. In low-power sleep mode, the current is only 15μA. The package form of TMI8150 is QFN3x3-20, which conforms to ROHS specifications, and the frame is 100% lead-free.
Fig.1 Application Circuit
FEATURES:
●Built-in 5-channel Motor Driver
●1~4CH Control Two Stepper Motors or Four DC motor, and the 5th Channel Control One DC Motor or Coil
●1ch/2ch & 3ch/4ch are Capable of Micro-steps Mode. Possible Modes are from 2-2 Phase Stepper Drive to Maximum 256 Resolution Micro-steps
●2.4V to 5.5V Operating Voltage
●Maximum Continuous Current: 0.7A
●VM Under-voltage Lockout (UVLO)
●Thermal Shutdown (TSD)
●Low-power Sleep Mode
●Automatic Fault Recovery
●A Small 20-pin QFN Package Type Has Been Adopted
TYPICAL APPILCATION:
●DC motor & STM motor
●PTZ of IPC
●Robot
ABSOLUTE MAXIMUM RATINGS (Note 1):
Table1
Table2
- 【Datasheet】TMI8150 5V 5-Channel Micro STM&DC Motor Driver
- 【Datasheet】TMI8150 5V 5-Channel Micro STM&DC Motor Driver
- +1 Like
- Add to Favorites
Recommend
- Stepper Motor Drivers with Built-in Micro-stepping Algorithm Solveing the Jitter and Noise Problems
- Benewake Offers A Low Cost Solution for Aunattended ETC Quick Toll Collection
- The “Magic Bullet“ for High-Current Scenarios, the Advantages of WAYON TOLL MOSFETs Explained
- At the front end of Data Short Range Communication 5.8GHz TAG/On Board Unit for Electronic Toll Collection
- QL Quartz Weigh-In-Motion Traffic Sensor Measures Accurately at The Speeds from 5 to 200km/h
- Learn About Electricity Meter RTC
- What Is an IoT Gateway and How to Overcome Challenges in IoT Gateway Applications
- GaN ePower Integrated Circuits Applied to Motor Drives
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.