TC350™ Plus Laminates Data Sheet
■High Thermal Conductivity of 1.24 W/(m.K)
◆Improved Thermal Dissipation Enabling Lower Operating Temperatures for High Power Applications
■Low Loss Tangent of 0.0017 at 10 GHz
◆Excellent High Frequency Performance
■Very Low Profile and Thermally Stable ED Copper Foil (Rq = 1.0 μm)
◆Very Low Insertion Loss and Reduced RF Heat Generation of Conductors
■Advanced Filler Systems
◆Improved Drilling Performance When Compared to Competitive Materials
●TC350™ Plus laminates are ceramic filled PTFE-based woven glass reinforced composite materials providing a cost effective, high performance, thermally enhanced material for the circuit designer. With a thermal conductivity of 1.24W/mK, this next generation PTFE-based laminate is ideally suited for higher power microwave and industrial heating applications requiring higher maximum operating temperatures, low circuit losses, and excellent thermal dissipation within the circuit board. Additionally, the advanced filler system used enables the composite to have much improved mechanical drilling performance when compared with other competitive laminates. This will result in lower manufacturing costs during circuit board fabrication.
●The standard TC350 Plus laminates are offered with a smooth (Rq = 1.0μm) electrodeposited copper foil cladding to reduce insertion loss and RF heating of conductors within the circuit. Resistive foil and metal plate options are available upon request. TC350 Plus aminates are available in thicknesses from 0.010” to 0.060” to address higher power design needs.
●The woven glass reinforcement combined with the high filler content of the laminate affords excellent dimensional stability. Other key features of the laminate include low z-axis CTE (38ppm/°C) for excellent plated through hole reliability, low loss tangent of 0.0017 at 10 GHz to enable low loss designs, low moisture absorption of 0.05% to ensure stable performance in a range of operating environments, high dielectric strength of 650 V/mil to ensure good z-axis insulation between conductor layers, and UL 94 V-0 flammability performance to enable the use of the material in commercial applications.
●TC350 Plus laminates are used in a range of applications including Amplifiers, Combiners, Power Dividers, Couplers, and Filters. Applicable markets range from Commercial and Consumer to Defense and Aerospace.
[ High Power RF and Microwave Power Amplifiers ][ High Power Amplifiers ][ Industrial Heating Applications ][ Passive Components ][ Couplers ][ Filters ][ Power Dividers ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
080922 |
|
|
|
92-191 |
|
211 KB |
- +1 Like
- Add to Favorites
Recommend
- TC350™ Plus Laminates for Higher Power Microwave and Industrial Heating Applications | Rogers
- Rogers Announces Acquisition of Silicone Engineering
- Sekorm Became an Authorized Distributor of Rogers
- Rogers Announces Termination of Merger Agreement with DuPont
- Rogers Corporation Introduces New Water-Resistant Flexible Heater Substrate
- Rogers‘ Micro Channel Coolers (MCC) in High Performance Computing (HPC) Applications
- Air Cooled VCSEL Applications with Rogers Micro-Channel-Coolers (MCC)
- Rogers‘ Advanced Laminates Power The Mars Exploration of NASA
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.