ESP32-C3-01M-KIT ESP WIFI MODULE DEVELOPMENT KIT

2022-07-29
■Product Overview
▲ESP-C3-01M-Kit is a core development board developed based on ESP-C3-01 module. The development board continues the classic design of the Node MCU development board, leading all I/Os to the headers on both sides, and developers can connect peripherals according to their needs. When using the breadboard for development and debugging, the standard headers on both sides can make the operation easier and more convenient.
▲ESP-C3-01M is a Wi-Fi module. This module core processor ESP32-C3 is a Wi-Fi+ BLE combination of system-level chips (SoC), designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc.
▲ESP32-C3 with industry-leading low power and RF performance, supporting Wi-FiIEEE802.11b/g/n agreements and BLE 5.0. ESP32-C3 chip is equipped with 32-bit RISC-V single-core processor, operating frequency up to 160 MHz. The chip is support to have secondary development without using other microcontrollers or processors. The chip has a built-in 400 KB SRAM,384 KB ROM,8KB RTC SRAM. Also, the chip support external Flash while it built-in 4Mbit Flash. ESP32-C3 chip supports a variety of low-power consumption working states, which can meet the power consumption requirements of various application scenarios. The chip's unique features such as fine clock gating function, dynamic voltage clock frequency adjustment function, and RF output power adjustable function can achieve the best balance between communication distance, communication speed and power consumption.
▲ESP-C3-01M provides a wealth of peripheral interfaces, including UART, PWM, SPI, I2S, I2C,ADC, temperature sensor and there are 15 GPIOs.
▲ESP-C3-01M has a variety of unique hardware safety mechanisms. The hardware encryption accelerator supports AES、SHA and RSA algorithm. Among them, RNG, HMAC and Digital Signature modules provide more security features. Other security features include flash encryption and se-cure boot signature verification, etc. The perfect security mechanism enables the chip to be perfectly applied to various encryption products.
▲ESP-C3-01M module supports low-power Bluetooth:Bluetooth5,Bluetooth mesh.
▲Bluetooth rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps. Support broadcast extension, multi-broadcasting, channel selection.
■Features
▲Complete Wi-Fi 802.11b/g/n,1T1R mode data rate up to 150Mbps
▲Support BLE5.0, Classic Bluetooth is not sup-ported, rate support: 125Kbps, 500Kbp,1Mbps, 2Mbps
▲32-bit RISC-V single-core processor, supports a clock frequency of up to 160 MHz, with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM
▲Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter
▲The development board has RGB three-in-one lamp beads, which is convenient for customers to develop
▲Integrated Wi-Fi MAC/BB/RF/PA/LNA/BLE
▲Support multiple sleep modes, deep sleep electric current is less than 5uA
▲UART rate up to 5Mbps 5Mbps
▲Support STA/AP/STA+AP mode and mix mode.
▲Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click network configuration
▲Support UART port location upgrade and remote firmware upgrade (FOTA)
▲General AT commands can be better understand
▲Support secondary development, integrated Windows, Linux development environment
▲ESP-C3-01M default adopt 4MByte Flash build-in chip, and does not support Flash expansion.

RF Solutions

ESP32-C3-01M-KITESP-C3-01M-KitESP-C3-01ESP-C3-01MESP32-C3ESP

More

Part#

WIFI MODULE DEVELOPMENT KITdevelopment boardWi-Fi modulechips

More

Internet of Things (IoT) ]mobile devices ]wearable electronic devices ]smart homes ]

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2021/10/26

DS-ESP32-C3-01M-KIT-1

1.3 MB

- The full preview is over. If you want to read the whole 12 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: