ESP32-C3-32S-KIT ESP WIFI MODULE DEVELOPMENT KIT
▲The ESP-C3-32S-Kit development board is a core development board designed by ESP-C3-32S modules. The development board continues the classic design of the NodeMCU development board, leading to all I/Os on both sides. With pin headers, developers can connect peripherals according to their needs. When using the breadboard for development and debugging, the standard headers on both sides can make the operation easier and more convenient. The ESP32-C3 chip has industry-leading low-power performance and radio frequency performance, and supports Wi-Fi IEEE802.11b/g/n protocol and BLE 5.0. The chip is equipped with a RISC-V 32-bit single-core processor with an operating frequency of up to 160 MHz.
▲Support secondary development without using other microcontrollers or processors. The chip has built-in 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM, built-in 4MB Flash also supports external Flash. The chip supports a variety of low power consumption working states, which can meet the power consumption requirements of various application scenarios. The chip's unique features such as fine clock gating function, dynamic voltage clock frequency adjustment function, and RF output power adjustable function can achieve the best balance between communication distance, communication rate and power consumption.
▲The ESP-C3-32S module provides a wealth of peripheral interfaces, including UART, PWM, SPI, I2S, I2C, ADC, temperature sensor and up to 21 available GPIOs.
▲The ESP-C3-32S module has a variety of unique hardware security mechanisms. The hardware encryption accelerator supports AES, SHA and RSA algorithms. Among them, RNG, HMAC and digital signature (Digital Signature) modules provide more security features. Other security features include flash encryption and secure boot (se-cure boot) signature verification. The perfect security mechanism enables the chip to be perfectly applied to various encryption products.
▲The ESP-C3-32S module supports low-power Bluetooth: Bluetooth5, Bluetooth mesh. Bluetooth rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps. Support broadcast extension, multi-broadcasting, channel selection.
■Features
▲Complete 802.11b/g/n Wi-Fi + BT+BLE SoC module, 1T1R mode data rate up to 150Mbps
▲Built-in ESP32-C3 chip, RISC-V 32-bit single-core processor, support clock frequency up to 160 MHz, with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM
▲Support UART/GPIO/ADC/PWM/I2C/I2S inter-face, temperature sensor, pulse counter
▲The development board has RGB three-in-one lamp beads, which is convenient for the second development of customers
▲Integrated Wi-Fi MAC/BB/RF/PA/LNA/Bluetooth
▲Support BLE5.0, does not support classic Bluetooth
▲Support multiple sleep modes, deep sleep current is less than 5uA
▲Serial port rate up to 5Mbps
▲Support STA/AP/STA+AP mode and promiscuous mode
▲Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS, one-click network configuration
▲Support serial port local upgrade and remote firmware upgrade (FOTA)
▲General AT commands can be used quickly
▲Support secondary development, integrated Windows and Linux development environment
|
ESP32-C3-32S-KIT 、 ESP-C3-32S-Kit 、 ESP-C3-32S 、 ESP32-C3 、 ESP |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021/10/26 |
|
|
|
|
|
DS-ESP32-C3-13U-KIT-1 |
|
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
- Renesas Partners with Jariet Technologies to Bolster Wireless Transceiver Solutions Portfolio
- The World‘s Top Providers of Communications Solutions PROSE Partners with ZTE for RF Solution Framework Agreement
- XBLW Chipol-Based Industrial RS485 Gateway Solution Using ESP32
- How to Program 802.11bgn Wifi Module with ESP32 in RTOS?
- Renesas Expands RF Portfolio to Cover Complete Signal Chain for Macro Base Stations
- Times Microwave Systems Non-Magnetic RF Interconnect Solutions
- Keysight‘s Open RAN Test Solutions Selected by Auden to Validate Open Radio Access Network Solutions
- Keysight Extends Collaboration with Synopsys to Validate Complex RF and Millimeter Wave Design
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
