ESP32-C3-13: ESP WIFI MODULE
▲This module core processor ESP32-C3 is a Wi-Fi+ BLE combination of system-level chips (SoC), designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc.
▲ESP32-C3 with industry-leading low power and RF performance, supporting Wi-Fi IEEE802.11b/g/n agreements and BLE 5.0.ESP32-C3 chip is equipped with a RISC-V 32-bit single-core processor, operating frequency up to 160 MHz. The chip is support to have secondary develop-ment without using other microcontrollers or processors. The chip has a built-in 400 KB SRAM，384 KB ROM，8KB RTC SRAM. The chip also support external Flashwhile it built-in 4Mbit Flash. ESP32-C3 chip supports a variety of low-power consumption working states, which can meet the power consumption requirements of various application scenarios.
▲The chip's unique features such as fine clock gating function, dynamic voltage clock frequency adjustment function, and RF output power adjustable function can achieve the best balance be-tween communication distance, communication speed and power consumption.
▲ESP-C3-13 module provides a wealth of peripheral interfaces, including UART，PWM，SPI，I2S，I2C，ADC, temperature sensor and there are 15 GPIOs.
▲ESP-C3-13 has a variety of unique hardware safety mechanisms. The hardware encryption accelerator supports AES、SHA and RSA algorithm. Among them, RNG、HMAC and Digital Signature module provide more security features. Other security features include flash encryption and se-cure boot signature verification, etc. The perfect security mechanism enables the chip to be perfectly applied to various encryption products.
▲ESP-C3-13 support low-power Bluetooth：Bluetooth5，Bluetooth mesh. Bluetooth rate support：125Kbps，500Kbps，1Mbps,2Mbps. Support broadcast extension, multi-broadcasting,channel selection.
■Features
▲Complete Wi-Fi 802.11b/g/n，1T1R mode data rate up to 150Mbps
▲Support BLE5.0 and rate support：125Kbps，500Kbps，1Mbps,2Mbps
▲32-bit RISC-V single-core processor, supports a clock frequency of up to 160 MHz, with 400 KB SRAM，384 KB ROM，8KB RTC SRAM
▲Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter
▲SMD-18 package
▲Integrated Wi-Fi MAC/ BB/RF/PA/LNA/BLE
▲Support multiple sleep modes, deep sleep electric current is less than 5uA
▲UART rate up to 5Mbps
▲Support STA/AP/STA+AP mode and mix mode
▲Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click network configuration
▲Support UART port local upgrade and remote firmware upgrade (FOTA)
▲General AT commands can be better understand
▲Support secondary development, integrated Linux development environment
▲ESP-C3N module acquiesce in using the built-in 4MByte Flash.
|
[ IoT ][ mobile devices ][ wearable electronics ][ smart home ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2022/4/11 |
|
|
|
|
|
DS-ESP32-C3-13-1 |
|
|
1.4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
