ESP32-C3-12F-KIT ESP WIFI MODULE DEVLOPMENT KIT

2022-07-29
■Product Overview
▲The ESP-C3-12F-Kit development board is a core development board designed by ESP-C3-12F for the ESP-C3-12F module. The development board continues the classic design of the NodeMCU development board, leading all I/O to the With pin headers, developers can connect peripherals according to their needs. When using the breadboard for development and debugging, the standard headers on both sides can make the operation easier and more convenient. The module's core processor chip ESP32-C3 is a highly integrated low-power Wi-Fi and Bluetooth system-on-chip (SoC), designed for the Internet of Things (IoT), mobile devices, wearable electronic devices, smart homes, etc. Designed for various applications.
▲The ESP32-C3 chip has industry-leading low-power performance and radio frequency performance, and supports Wi-Fi IEEE802.11b/g/n protocol and BLE 5.0. The chip is equipped with a RISC-V 32-bit single-core processor with an operating frequency of up to 160 MHz.
▲Support secondary development without using other microcontrollers or processors. The chip has built-in 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM, built-in 4MB Flash also supports external Flash. The chip supports a variety of low power consumption working states, which can meet the power consumption requirements of various application scenarios. The chip's unique features such as fine clock gating function, dynamic voltage clock frequency adjustment function, and RF output power adjustable function can achieve the best balance between communication distance, communication rate and power consumption.
▲The ESP-C3-12F module provides a wealth of peripheral interfaces, including UART, PWM, SPI, I2S, I2C, ADC, temperature sensor and up to 15 GPIOs.
▲The ESP-C3-12F module has a variety of unique hardware security mechanisms. The hardware encryption accelerator supports AES, SHA and RSA algorithms. Among them, RNG, HMAC and digital signature (Digital Signature) modules provide more security features. Other security features include Flash encryption and secure boot (se-cure boot) signature verification. The perfect security mechanism enables the chip to be perfectly applied to various encryption products
▲The ESP-C3-12F module supports low-power Bluetooth: Bluetooth5, Bluetooth mesh. Bluetooth rate support: 125Kbps,500Kbps,1Mbps,2Mbps. Support broadcast extension, multi-broadcasting, channel selection.
■Features
▲Support Wi-Fi 802.11b/g/n, 1T1R mode data rate up to 150Mbps
▲Support BLE5.0, does not support classic Bluetooth, rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps
▲RISC-V 32-bit single-core processor, supports a clock frequency of up to 160 MHz, has 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM
▲Support UART/PWM/GPIO/ADC/I2C/I2S interface, support temperature sensor, pulse counter
▲The development board has RGB three-in-one lamp beads, which is convenient for the second development of customers
▲Support multiple sleep modes, deep sleep current is less than 5uA
▲Serial port rate up to 5Mbps
▲Support STA/AP/STA+AP mode and promiscuous mode
▲Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS, one-click network configuration
▲Support serial port local upgrade and remote firmware upgrade (FOTA)
▲General AT commands can be used quickly
▲Support secondary development, integrated Windows and Linux development environment
▲About Flash configuration ESP-C3-12F uses the built-in 4MByte Flash of the chip by default, and supports the external Flash version of the chip.

RF Solutions

ESP32-C3-12F-KITESP-C3-12F-KitESP-C3-12FESP32-C3ESP

More

Part#

WIFI MODULE DEVLOPMENT KITdevelopment boardchip

More

Internet of Things (IoT) ]mobile devices ]wearable electronic devices ]smart homes ]

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2021/10/26

DS-ESP32-C3-12F-KIT-1

1.3 MB

- The full preview is over. If you want to read the whole 11 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: