ESP32-C3-01M-KIT: ESP WIFI MODULE DEVELOPMENT KIT
▲ESP-C3-01M-Kit is a core development board developed based on ESP-C3-01 module. The development board continues the classic design of the NodeMCU development board, leading all I/Os to the headers on both sides, and developers can connect peripherals according to their needs. When using the breadboard for development and debugging, the standard headers on both sides can make the operation easier and more convenient.ESP-C3-01M is a Wi-Fi module. This module core processor
▲ESP32-C3 is a Wi-Fi+ BLE combination of system-level chips (SoC), designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc.
■Features
▲Complete Wi-Fi 802.11b/g/n,1T1R mode data rate up to 150Mbps
▲Support BLE5.0, Classic Bluetooth is not sup-ported, rate support: 125Kbps, 500Kbp,1Mbps, 2Mbps
▲32-bit RISC-V single-core processor, supports a clock frequency of up to 160 MHz, with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM
▲Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter
▲The development board has RGB three-in-one lamp beads, which is convenient for customers to develop
▲Integrated Wi-Fi MAC/BB/RF/PA/LNA/BLE
▲Support multiple sleep modes, deep sleep electric current is less than 5uA
▲UART rate up to 5Mbps 5Mbps
▲Support STA/AP/STA+AP mode and mix mode.
▲Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click network configuration
▲Support UART port location upgrade and remote firmware upgrade (FOTA)
▲General AT commands can be better understand
▲Support secondary development, integrated Windows, Linux development environment
▲ESP-C3-01M default adopt 4MByte Flash build-in chip, and does not support Flash expansion.
[ IoT ][ mobile devices ][ wearable electronics ][ smart home ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2022/4/8 |
|
|
|
DS-ESP32-C3-01M-KIT-1 |
|
1.1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.