Dispensing Corning® Matrigel® Matrix Solutions with a Corning Step-R™ Repeating Pipettor
●The Corning Step-R repeating pipettor (Corning Cat. No. 4217) is suitable for dispensing viscous liquids, and for all applications where long dosing series are required. The fast and precise multiple dispensing enabled by the Corning Step-R repeating pipettor is particularly useful in Corning Matrigel matrix self-coating protocols for cell culture in multiwell plates or microplates. Sterile syringe tips are available in a range of sizes to dispense doses from 1 pL up to 5 mL.
■Corning Matrigel Matrix:
●Matrigel matrix (Corning Cat. No. 354230) ships frozen and should be stored at -20°C until ready to use. Thaw Matrigel matrix overnight at 4°C on ice until ready to use. Pre-chill syringe tips, plates, and other consumables that will come in contact with Matrigel matrix at 4°C before beginning work. Remember to keep Matrigel matrix stock and dilute solutions cold until ready to polymerize. All work should be conducted in a biosafety cabinet using aseptic technique with sterile consumables and reagents.
◆ In a centrifuge tube or reagent reservoir, dilute the stock Matrigel matrix with cold cell culture medium to a specifi c working concentration. Prepare extra volume of working solution to accommodate discarding the first and last dispense step.
◆ Insert the syringe tip into the Step-R pipettor unit and click the lever to lock it in place. If using the 25 or 50 mL syringe tip, attach the proper adapter to the syringe tip before insertion into the Step-R pipettor.
◆NOTE: Use a syringe tip of enough volume (with the correct step size for the dispense volume) to minimize the amount of times the syringe tip requires refilling.
◆ Set the dial to the correct volume for dispensing.
◆ Slowly draw up the Matrigel matrix solution, keeping the syringe tip in the solution as long as the solution is filling the syringe tip.
◆Dispense the first step (see Step 1) into the source container to prime the syringe tip, then slowly dispense each step to the bottom of each well.
◆If necessary, repeat Steps 4 and 5 to fill all wells
■Conclusions:
●The Corning Step-R repeating pipettor supports accurate dispensing of Matrigel matrix of different viscosities with a large range of dispense volumes.
Step-R™ 、 354230 、 4217 、 Step-R 、 Matrigel Matrix |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
10/19 |
|
REV 1 |
|
CLS-AN-551/H-STEP-R-MG |
|
534 KB |
- +1 Like
- Add to Favorites
Recommend
- How to Convert 110V AC to 12 Volt DC: A Step-by-Step Guide
- UNIMOTION‘s Stepper Systems Offering a Complete Solution of a Stepper Motor, Drive and Cables
- Stepper Motor Drivers with Built-in Micro-stepping Algorithm Solveing the Jitter and Noise Problems
- Designing an AC-DC Converter Circuit: A Step-by-Step Guide
- SinoGNSS Data Link Module Introduction and Configuration Step by Step
- The New RA6T1 Motor Control Rssk:Only Three Simple Steps to Use
- SANYO DENKI Develops Stepping Systems Featuring High Torque and Low Vibration
- How to control a step motor with an Arduino
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.