Model 977CM Pulsed DC Controller
■The Model 977CM Pulsed DC controller is designed to power Meech Industrial Pulsed DC ionisers, including: 971 Ionising Bar, 261 Ionising Nozzle, 261 Ionising Flexi-Nozzle.
■The unit is mains powered with an in-built switchmode power supply to allow its use on all mains voltages and frequencies. Display is via a LCD panel with adjustment made by 4 push buttons.
■The Pulsed DC output has a maximum voltage of +/- 15 kV and a frequency range of 1 to 20 Hz. Output balance is adjustable from 80%/20% positive/ negative to 20% / 80% positive/negative.
■In-built current monitoring maintains optimum ion output by adjusting the output voltage to counteract the effects of dirt build-up on attached ionising bars and/or nozzles.
■Audible visual and remote alarms alert operators to the need to clean the ionisers. Analogue outputs enable logging of system performance.
■A software lock allows the front panel controls to be locked to prevent unauthorised adjustment of the ionising system.
■An input for a Meech 988 Feedback sensor bar facilitates closed-loop feedback control of the system, together with outputs for data logging etc.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
26.10.2017 |
|
issue 2 |
|
|
|
2.5 MB |
- +1 Like
- Add to Favorites
Recommend
- Keysight Announces New Device Modeling Software to Enable One-Stop Workflow
- TE Model 41 Crash Test Accelerometer: Designed for Crush Zone Testing
- The Model EGAS-S398C NCAP Pedestrian Impact Test Sensor Available in Ranges from ±50g to ±2000g
- Wideband Gap Semiconductors: What Modeling Challenges Must We Overcome
- Why Can the Servo Motors Accurately Control the Rotation of the Model Aircraft?
- How to Build AMI Models for DDR5 Memory Interfaces
- Keysight Radio Frequency Device Model Generator Adopted by Samsung Foundry
- Epson Researchers Create 3-D Analytical Model to Accelerate Development of Next-generation Axial-flux Permanent Magnet Motors
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.