Model 988 Sensor Bar
■The 988 Sensor Bar works in conjunction with the Meech 977CM Pulsed DC controller and 976 ionising bar to provide closed-loop static control. Positioned after the ionising bar it senses the residual charge on a web or winding reel. Depending on the charge detected, the 977CM adjusts its output to try to achieve zero residual charge.
■The bar is constructed from rugged UHMWPE (Polyethylene) and is mounted on the machine using sliding T bolts. A coaxial signal cable connects to the 977CM using a stereo 2.5mm Jack plug. Soft stainless steel brush detects the charge on the material without the risk of scratching in the case of accidental contact.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
27.10.2017 |
|
|
|
|
|
634 KB |
- +1 Like
- Add to Favorites
Recommend
- Keysight Announces New Device Modeling Software to Enable One-Stop Workflow
- TE Model 41 Crash Test Accelerometer: Designed for Crush Zone Testing
- The Model EGAS-S398C NCAP Pedestrian Impact Test Sensor Available in Ranges from ±50g to ±2000g
- Wideband Gap Semiconductors: What Modeling Challenges Must We Overcome
- Why Can the Servo Motors Accurately Control the Rotation of the Model Aircraft?
- How to Build AMI Models for DDR5 Memory Interfaces
- Keysight Radio Frequency Device Model Generator Adopted by Samsung Foundry
- Epson Researchers Create 3-D Analytical Model to Accelerate Development of Next-generation Axial-flux Permanent Magnet Motors
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.