CRFB Series™ Round Recessed Floor Boxes Multi-Service Floor Boxes for Raised & Wood Floors
■FEATURES & BENEFITS
▲Locking tabs help secure box to floor panel. This allows for quick and easy installation.
▲Prewired and custom plate options. Prewired units reduce labor costs for field installation. Consult the factory for more information on custom plates or prewired options.
▲Large multi-compartment boxes. Provides adequate wiring capacity and easily isolates power and communication services.
▲Ease of installation. CRFB Series Floor Boxes are designed to be installed before or after floor coverings have been installed.
▲Accepts the Evolution™Series Poke-Thru Covers. The CRFB Series Floor Box has been designed to accept the round 8" Evolution Series Poke-Thru Covers, increasing the ability to match aesthetics throughout the building.
▲Configurable. CRFB Series Floor Boxes can be field-configured or reconfigured to accommodate power only, communication only, audio/video only, or combinations of all three power, communication and audio/video in a single floor box unit.
▲Flexible box design. Flexible box design has been improved with a tunnel feature that allows for the two outer compartments to be used for a single service, while the other two compartments are used for different services.
▲Range of Conduit sizes. Wide range of knockouts 1/2",3/4", 1-1/4" and 2" trade size allow for most conduit sizes.
▲Meets ADA Accessibility Guidelines. Wide trim flange is designed to meet the ADA Accessibility Guidelines as it pertains to ADA Standard 4.5 which addresses changes in floor and ground surface levels. The poke-thru trim flanges are beveled so the slope is no greater than 1:2 ratio.
▲Fits into diffuser openings. CRFB Series Floor Boxes are designed to be installed in a standard round diffuser opening. NOTE: Most raised floor system manufacturers precut their panels to fit round diffusers.
▲Audio/video ready. CRFB Series Floor Boxes have been designed to accept a wide range of audio/video devices from most manufacturers.
▲Compatible with wood floors. CRFB Series Floor Boxes are designed to be used in wood floor applications such as: stages, altars, and balconies.
▲Meets Buy American Act. the CRFB Series floor boxes are manufactured in the United States and comply with all BAA (Buy American Act) and NAFTA (North American Free Trade Act) requirements.
▲TopGuard™ Protection. Integral design component that prevents water, dirt, and debris from entering power and communication compartments. Meets and exceeds all UL scrub water exclusion requirements for tile and carpet floors.
▲Datacom connectivity options. Accepts industry standard proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point-of-use.
▲Listed by Underwriters Laboratories Inc. to U.S. and Canadian safety standards for raised floors and wood floors.
▲Meets NEC Section 300-22(C). The AC, AF, SAF, and CRFB Series Floor Boxes are suitable for use in air handling spaces and raised floor plenums.
CRFB Series 、 CRFB 、 CRFB4 、 CRFBCTCBK 、 CRFBCTCBS 、 CRFBCTCNK 、 CRFBCTCBZ 、 CRFBCTCGY 、 CRFBBTCBK 、 CRFBBTCNK 、 CRFBBTCBS 、 CRFBBTCGY 、 CRFBBTCBZ 、 CRFBCTCBKTR 、 CRFBCTCBSTR 、 CRFBCTCNKTR 、 CRFBCTCBZTR 、 CRFBCTCGYTR 、 CRFB-TUN 、 CRFBBTCBKTR 、 CRFBBTCNKTR 、 CRFBBTCBSTR 、 CRFBBTCBZTR 、 CRFBBTCGYTR 、 8CTCGY 、 8CTCBK 、 8CTCBS 、 8CTCBZ 、 8CTCNK 、 8CTGY 、 8CTBK 、 8CTBS 、 8CTBZ 、 8CTNK 、 CRFB-B-1 、 CRFB-D-1 、 CRFB-GFI-1 、 CRFB-SR1-1 、 CRFB-AB-1 、 CRFB-RT-1 、 CRFB-B-2 、 CRFB-D-2 、 CRFB-GFI-2 、 CRFB-SR1-2 、 CRFB-SR2-2 、 CRFB-AB-2 、 CRFB-RT-2 、 CRFB-B-3 、 CRFB-D-3 、 CRFB-GFI-3 、 CRFB-SR1-3 、 CRFB-AB-3 、 CRFB-RT-3 、 CRFB-BEZ6A-4 、 CRFB-B-4 、 CRFB-D-4 、 CRFB-GFI-4 、 CRFB-SR1-4 、 CRFB-MAAP-4 、 CRFB-6COM-4 |
|
Round Recessed Floor Boxes 、 Multi-Service Floor Boxes 、 Floor Box 、 Device Plates |
|
[ conference rooms ][ schools ][ stages ][ altars ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
October 2010 |
|
|
|
ED1551R2 |
|
1.1 MB |
- +1 Like
- Add to Favorites
Recommend
- Conductive Polymer Hybrid Aluminum Electrolytic Capacitors 80V products added to the HXA/HXB Series Radial lead type HSA/HSB Series commercialized
- Nippon Chemi-Con Developed Snap-in Type Aluminum Electrolytic Capacitors RLB Series with High Ripple and RLA Series with Longer Life
- Nippon Chemi-Con AEC-Q200 Compliant Snap-in Type KVB Series Aluminum Capacitators is Suitable for OBC
- Nippon Chemi-Con Expanded Size Range of KHF/KWB Series Radial Lead Type Aluminum Electrolytic Capacitors, Increasing capacitance by up to 20%
- Nippon Chemi-Con Developed RHB Series Screw Terminal Type Aluminum Electrolytic Capacitors with 700V-rated Voltage
- Large Capacitance φ12.5 to φ18mm Products Added to the “MHB Series” SMD Type Aluminum Electrolytic Capacitors
- Nippon Chemi-Con Developed Radial Lead Type Aluminum Electrolytic Capacitors KWB Series with 20% Higher Capacitance
- Nippon Chemi-Con Developed Screw Terminal Type Aluminum Electrolytic Capacitors RHB Series Achieving a Withstand Voltage of 700V
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.