LA-ispPAC-POWR1014/A Automotive Family:In-System Programmable Power Supply Supervisor,Reset Generator and Sequencing Controller Data Sheet
■Lattice's Power Manager II LA-ispPAC-POWR1014/A is a general-purpose power-supply monitor and sequence controller, incorporating both in-system programmable logic and in-system programmable analog functions implemented in non-volatile E2CMOS® technology. The LA-ispPAC-POWR1014/A device provides 10 independent analog input channels to monitor up to 10 power supply test points. Each of these input channels has two independently programmable comparators to sup-port both high/low and in-bounds/out-of-bounds (win-dow-compare) monitor functions. Four general-purpose digital inputs are also provided for miscellaneous control functions.
■The LA-ispPAC-POWR1014/A provides 14 open-drain digital outputs that can be used for controlling DC-DC converters, low-drop-out regulators (LDOs) and opto-couplers, as well as for supervisory and general-purpose logic interface functions. Two of these outputs (HVOUT1-HVOUT2) may be configured as high-voltage MOSFET drivers. In high-voltage mode these outputs can provide up to 8V for driving the gates of n-channel MOS-FETs so that they can be used as high-side power switches controlling the supplies with a programmable ramp rate for both ramp up and ramp down.
●Features
■Monitor and Control Multiple Power Supplies
▲Simultaneously monitors up to 10 power supplies
▲Provides up to 14 output control signals
▲Programmable digital and analog circuitry
■AEC-Q100 Tested and Qualified
■Embedded PLD for Sequence Control
▲24-macrocell CPLD implements both state machines and combinatorial logic functions
■Embedded Programmable Timers
▲Four independent timers
▲32 μs to 2 second intervals for timing sequences
■Analog Input Monitoring
▲10 independent analog monitor inputs
▲Two programmable threshold comparators per analog input
▲Hardware window comparison
▲10-bit ADC for I²C monitoring (LA-ispPAC-POWR1014A only)
■High-Voltage FET Drivers
▲Power supply ramp up/down control
▲Programmable current and voltage output
▲Independently configurable for FET control or di gital output
■2-Wire (I2C/SMBus™ Compatible) Interface
▲Comparator status monitor
▲ADC readout
▲Direct control of inputs and outputs
▲Power sequence control
▲Only available with LA-ispPAC-POWR1014A
■3.3V Operation, Wide Supply Range 2.8V to 3.96V
▲Automotive temperature range: -40°C to +105°C
▲48-pin TQFP package, lead-free option
■Multi-Function JTAG Interface
▲In-system programming
▲Access to all I2C registers
▲Direct input control
LA-ispPAC-POWR1014A 、 LA-ispPAC-POWR1014 、 LA-ispPAC-POWR1014X-01TN48E 、 LA-ispPAC-POWR1014A-01TN48E 、 LA-ispPAC-POWR1014-01TN48E |
|
general-purpose power-supply monitor 、 general-purpose sequence controller |
|
[ Automotive ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TQFP |
|
English Chinese Chinese and English Japanese |
|
October 2020 |
|
Version 1.4 |
|
FPGA-DS-02090 |
|
5.6 MB |
- +1 Like
- Add to Favorites
Recommend
- Why GaN in Space?
- Innoscience Built The First World-class 8-inch Wafer FAB with Gold-free and CMOS Compatible Process
- Two kinds of structure of unit in SiC power MOSFET: plane structure and groove structure
- Successful Demonstration of Next-Gen Ka-band Rx Beamforming IC Portfolio with 1.5dB NF LNA
- Futureway Has Developed a Variety of Silicone Solutions for Battery Pack
- UnitedSiC Rediscovers The Perfect Switch with SiC FETs
- These Kinds of MOS Tubes “Breakdown“, How Many Do You Know?
- Low-Frequency Noise Modeling When Quantum Chips Are Getting Noiser
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.