Lumina™ RF Decora® Keypad Room Controller For Use with Lumina RF Wireless Room Control System Product Data
■The Lumina™ RF Decora® Keypad Room Controller (DLDNK) is the primary user interface for a Lumina RF Wireless Room Control System, combining both familiar pushbutton control and energy management business logic into line voltage-powered wireless communication devices. The Lumina RF Keypad manages a room by coordinating activities of all Lumina RF Wireless Fevices within the space.
■Lumina RF Wireless Room Control System
The Keypad works with compatible wireless devices to create an advanced intelligent lighting system that can be used to comply with IECC, ASHRAE 90.1, and 2019 Title 24, Part 6 occupancy/vacancy sensing, 0-10V dimming, and daylight harvesting requirements. Dimming, multi-zone daylight harvesting, occupancy and vacancy sensing, manual control, and scene control are configured using the Bluetooth®-enabled Lumina RF Wireless App.
■The Keypad also provides the primary interface between the smartphone/tablet commissioning and control device and the Lumina RF Wireless Room Control System. Wirelessly configure, control, monitor and provision the Lumina RF Wireless Room Control system using the Bluetooth®-enabled Lumina RF Wireless App designed for an Android or iOS smart phone and other compatible devices within a 30’ range.
●Applications
■Daylight harvesting with occupancy and light level sensing with optional LURPC Photocell
■ Room entry stations or remote (3-way) switch for use at other entry doors
■ Coordination of Lumina RF Wireless energy management devices in a space
■ Control of Intellect-enabled lamps and fixtures. Contact factory for more information
●Features
■ Bluetooth interface for connection to any Android or iOS devices with Bluetooth 4.0 with BLE—download the Lumina RF Wireless App at Google Play or the Apple App Store
▲Configuration
▲ Control
▲Status monitoring
■ Every node is a repeater
■ Line voltage powered
■ Implements energy management business logic for Lumina RF Wireless devices
■Customizable buttons that can be programmed through the Leviton Lumina RF Wireless App to perform a variety of functions:
▲ Room ON/OFF
▲Group ON/OFF
▲ Scene
▲Any fixture at any level
▲Fade time
▲Preset groups
▲Toggle
■ Button LEDs monitor and track actual room status
■ Decora aesthetic
■Available in 1-, 2-, 4- and 8-button models
■LED status indicators
■ Multiple operating modes: toggle maintained, toggle momentary and preset
■ Can be used to comply with IECC, ASHRAE 90.1, and 2019 Title 24, Part 6 occupancy/vacancy sensing, 0-10V dimming and daylight harvesting requirements
DLDNK-01W 、 DLDNK-02W 、 DLDNK-04W 、 DLDNK-05W 、 DLDNK-xxx 、 DLDNK-08W |
|
[ Daylight harvesting with occupancy and light level sensing with optional LURPC Photocel ][ Room entry stations or remote (3-way) switch for use at other entry doors ][ Coordination of Lumina RF Wireless energy management devices in a space ][ Control of Intellect-enabled lamps and fixtures ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
FEB 2021 |
|
REV FEB 2021 |
|
G-10081J/B21-aa |
|
439 KB |
- +1 Like
- Add to Favorites
Recommend
- Keysight Extends Collaboration with Synopsys to Validate Complex RF and Millimeter Wave Design
- Take Advantage of Open-Source RF Analysis Toolkits
- Renesas Expands RF Portfolio to Cover Complete Signal Chain for Macro Base Stations
- Differences between UART RF Module and RF Modem
- Keysight’s new software solution S8714A UXM 5G RF Application designed to simplify and accelerate RF measurements with signaling
- Common RF Antennas of Bluetooth Modules: The Ultimate Guide
- Bringing WIFI RF Front-end Chips, Low-noise Amplifiers, 5G Small Base Station RF Chips, CHIPBETTER Announced a Distribution with Sekorm
- Kinghelm RF Coaxial Connector IPEX Inner Hole KH-252515-Y2.1 Designed for Wireless Communication and RF Applications
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.