JUMO Wtrans p Pressure Transmitter with Wireless Data Transmission
The pressure transmitter with wireless data transmission Wtrans p is intended for industrial applications. It is used in combination with a Wtrans receiver for stationary or mobile recording of the pressure in liquefied or gaseous media. The pressure transmitter operates according to the strain gauge measuring principle.The measured values are transmitted wirelessly to the receiver of the Wtrans system. The measured values are displayed on the receiver and are available at the RS485 interface in digital form as well as in electrical standard signals at the analog outputs. Optionally, different alarms can besignaled at the receiver with two relay outputs.The pressure transmitter can be installed in any installation position. Optimum alignment with the receiver must be ensured. The ambient temperature range in which the device can be used is from -30 to +85 °C.The radio frequency of the Wtrans measuring system is 868.4 MHz (Europe). This frequency is almost impervious to external interference and allows data to be transmitted even in harsh industrial environments. When using the antenna holder for wall mounting with the 3 m antenna cable for the receiver, the open air range is up to 300 m.A 3.6 V lithium battery (size C) is used to supply voltage to the pressure transmitter.A setup program is available as an accessory for easy configuration and parameterization of the pressure transmitter and the Wtrans receiver on the laptop/PC. As an optional extra, the On-lineChart function can be used to record the measured values on the laptop/PC.
●Special features:
■Radio frequency 868.4 MHz (Europe)
■Open air range up to 300 m
■Configurable transmitter detection
■Battery status monitoring
■High moisture and vibration resistanee
■Configurable via easy-to-use setup program
■OnlineChart of the measured values
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2020/03/30 |
|
V3.00 |
|
00579091 |
|
395 KB |
- +1 Like
- Add to Favorites
Recommend
- How to Judge the Working State of MOS Tube?
- Kinghelm FPC Connector KH-CL0.5-H2.0-12PIN with Rated Voltage of 50V and Pitch of 0.5mm
- Kinghelm Released a High-density and Miniaturized FPC Connector KH-CL0.5-H2.0-6PIN with Insulation Resistance Greater Than 500MΩ
- KODENSHI Developed PIR Module Sensor Well-durable and Easy to Apply for Home Appliances
- SEMITEC‘s Ultra-compact, High-precision Sensors for Advanced Medical Applications
- Explain in Detail the Cause of MOS Tube Heating
- COOLMOS Learning project
- Two kinds of structure of unit in SiC power MOSFET: plane structure and groove structure
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.