HM25Q40A 3V 4M-BIT SERIAL NOR FLASH WITH DUAL AND QUAD SPIHM25Q40A

PublishTime：2021-07-15

The 25S40/20 of non-volatile flash memory device supports the standard Serial Peripheral Interface (SPI). Traditional SPI single bit serial input and output (Single I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit (quad I/O) serial protocols. This multiple width interface is called SPI Multi-I/O or MIO.
The SPI protocols use only 4 to 6 signals:
●Chip Select (CS#)
●Serial Clock (CLK)
●Serial Data
◆IO0 (DI)
◆IO1 (DO)
◆IO2 (WP#)
◆IO3 (HOLD# / RESET#)
The HM25Q40A support the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI as well as 2-clocks instruction cycle Quad Peripheral Interface : Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (WP#), and I/O3 (HOLD#/RESET#). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. The Continuous Read Mode allows for efficient memory access with as few as 8-clocks of instruction-overhead to read a 24-bit address, allowing true XIP (execute in place) operation.
A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device ID and SFDP Register, a 64-bit Unique Serial Number and three 256-bytes Security Registers.
The HM25Q40A/20 provides an ideal storage solution for systems with limited space, signal connections, and power. These memories' flexibility and performance is better than ordinary serial flash devices. They are ideal for code shadowing to RAM, executing code directly (XIP), and storing reprogrammable data.
FEATURES
●Low power supply operation
◆Single 2.3V-3.6V supply
●4M/2M bit Serial Flash
◆4 M-bit/512K-byte/2,048 pages
◆2 M-bit/256K-byte/1,024 pages
◆256 bytes per programmable page
◆Uniform 4K-byte Sectors, 32K/64K-byte Blocks
●New Family of SpiFlash Memories
◆Standard SPI: CLK, CS#, DI, DO, WP#,HOLD# / RESET#
◆Dual SPI: CLK, CS#, DI, DO, WP#, HOLD# /RESET#
◆Quad SPI: CLK, CS#, IO0, IO1, IO2, IO3
◆Software & Hardware Reset
◆Auto-increment Read capability
●Temperature Ranges
◆Industrial (-40°C to +85°C)
◆Extended (-20°C to +85°C)
●Low power consumption
◆9mA typical active current
◆2uA typical power down current
●Efficient “Continuous Read” and Quad Read
◆Continuous Read with 8/16/32/64-Byte Wrap
◆As few as 8 clocks to address memory
◆Quad Peripheral Interface reduces instruction overhead
●Flexible Architecture with 4KB sectors
◆Sector Erase (4K-bytes)
◆Block Erase (32K/64K-bytes)
◆Page Program up to 256 bytes
◆More than 100K erase/program cycles
◆More than 20-year data retention
●Advanced Security Feature
◆Software and Hardware Write-Protect
◆Power Supply Lock
◆Down and OTP protection
◆Top/Bottom, Complement array protection
◆64-Bit Unique ID for each device
◆Discoverable parameters(SFDP) register
◆3X256-Bytes Security Registers with OTP locks
◆Volatile & Non-volatile Status Register Bits
●High performance program/erase speed
◆Page program time: 400us typical
◆Sector erase time: 35ms typical
◆Block erase time: 200ms typical
◆Chip erase time: 10 Seconds typical
●Package Options
◆8-pin SOIC 150/208-mil
◆8-pad WSON 6x5-mm
◆8-pin PDIP 300-mil
◆All Pb-free packages are RoHS compliant

Brand of Product：	H&M SEMI
Part#：	HM25Q40A 、 HM25Q40A/20 More Part#
Product Category：	NOR FLASH More
Application：	More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：	8-Pin SOIC 150-mil;8-Pin SOIC 208-mil;8-Contact WSON (6x5mm);8-Pin PDIP 300-mil;FAB024 24-Ball BGA;FAC024 24-Ball BGA
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2017/12/15
Version Number：	Version No.A
Data Encoding：
Data Size：	3.7 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 62 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

New Products & Solutions

More>

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits