JUMO dTRANS T05: Programmable two-wire transmitter for installation into terminal head form B and for installation on DIN rail Data Sheet
The transmitters record sensor signals from RTD temperature probes, thermocouples, resistance transmitters, or resistors/potentiometers. When using a resistor/potentiometer or RTD temperature probe, the sensor connection on the input side can be connected with a two-wire, threewire, or four-wire circuit. Voltage signals in the range from -100 to +1100 mV can also be recorded. Depending on the selected measurement input, the linear and temperature-linear linearization variants and the possibility of easily configurable customer-specific linearization are available.
Type 707050 delivers 4 to 20 mA as an output signal. Type 707051 delivers 4 to 20 mA or 0 to 10 V as an output signal. The measurement input and the output signal are galvanically isolated from one another. The output signal can be reversed for both types.
The transmitter configuration with respect to probe type, connection technology of the probe, measuring range (user configurable), and linearization is carried out by a setup program on the PC. The connection to the PC is established via a USB interface which does not require additional auxiliary voltage. Via the USB interface, the min./max. process value and the min./max. operating temperature recorded by the transmitter can be read and the sensor wiring can be checked online.
The operating status of the transmitter is indicated by a two-color control LED (red/green). The control LED is lit green during malfunction-free operation. A fault such as a probe break will be shown by the corresponding LED signaling.
●Special features:
■ Measuring input for RTD temperature probe, thermocouple, resistor/ potentiometer, resistance transmitter, and voltage
■ Input and output are electrically isolated
■ Control LED (red/green)
■ Configuration directly via USB cable without additional auxiliary voltage
■ Customer-specific linearization
■ Detection of the min./max. process value (drag pointer function including point in time)
■ Option to specify the temperature in °F for temperature sensors
■ Type 707051 available with screw terminals or spring-cage terminals
707050 、 707051 、 707050/8-06 、 00574959 、 00506252 、 00616250 、 00639360 、 00352463 、 00528648 |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2020/03/31 |
|
V1.00 |
|
00576949 |
|
680 KB |
- +1 Like
- Add to Favorites
Recommend
- [应用]25A/40V德欧泰克SBX2540-3G太阳能旁路二极管用于光伏电池板,泄漏电流低仅200μA
- [产品]采用DO-201AE封装的TVS二极管1.5KE6.8~1.5KE550CA,峰值脉冲功率为1500W
- Kinco has launched new 1.5KW, 2.5KW and 3KW High Power Servo Motor to meet market demand
- ALKAIDSEMI: Innovator in Power Devices and Smart Sensor Technology
- Horizon Robotics, a Global Leader in Edge AI Chips, Announced a Distribution Agreement with Sekorm
- Greenconn荣获邓白氏企业认证,实力彰显行业领先水平
- How to Select High Power Schottky Rectifier Diodes
- Technical Characteristics and Application Scenarios of 4.3-inch LCD Screen
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.