JUMO digiLine hub Bus distributor for digital sensors from JUMO
●individual hub as star distributor for the branching the bus line to a maximum of 4 digital sensors
●star-shaped topology with several hubs close to one another (short bus line connections be-tween the hubs) to more than 4 digital sensors
●branch lines in a line topology The JUMO digiLine hub has an integrated voltage controller that can be used to supply the bus voltage of DC 5 V from the node point. Generation of the DC 5 V voltage supply close to the dig-ital sensor minimizes the voltage drop in the bus lines. Feeding DC 24 V directly to the JUMOdigiLine hub is a prerequisite. This voltage can be provided by either the master device or power supply unit available as an accessory. Distribution of the incoming voltage supply and activation of the internal voltage controller are configured in the JUMO digiLine hub with the aid of a switch.In this way, the bus voltage supply can be tailored to the requirements of the bus installation that result from the line lengths and current consumption of the digital sensors.
[ digital sensors ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2020/03/30 |
|
V1.00 |
|
00664025 |
|
424 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.