RS0101 1-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Application
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. OE has an internal pull-down current source, as long as VCCA is powered.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull- down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
The RS0101 is available in Green SOT23-6 、 SOT363(SC70-6) and DFN1.45x1.0-6L packages. It operates over an ambient temperature range of -40°C to +85°C.
●FEATURES:
■ No Direction-Control
■ Data Rates:
◆24Mbps (Push-Pull)
◆2Mbps (Open-Drain)
■ 1.65V to 5.5V on A ports and 2.3V to 5.5V on B Ports (V-CCA≤V-CCB)
■ V-CC Isolation: If Either V-CC is at GND, Both Ports are in the High-Impedance State
■ No Power-Supply Sequencing Required: Either V-CCA or V-CCB can be Ramped First
■ I-OFF: Supports Partial-Power-Down Mode Operation
■ Extended Temperature: -40°C to +85°C
RS0101 、 RS0101YH6 、 RS0101YC6 、 RS0101YUTDV6 |
|
1-Bit Bidirectional Voltage-Level Translator 、 1-bit non-inverting translator 、 bidirectional voltage-level translator |
|
[ I²C/ SMBus ][ UART ][ GPIO ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT23-6;SOT363;SC70-6;DFN |
|
English Chinese Chinese and English Japanese |
|
2021/01/01 |
|
REV A.2 |
|
|
|
1 MB |
- +1 Like
- Add to Favorites
Recommend
- Runic Level Conversion Chips Won the “2021 China IC Design Achievement Award for the Best Amplifier/Data Converter“ Award
- Runic Technology Launches Eleven Automotive-qualified ICs Meeting AEC-Q100 Grade 1 and MSL1
- RS0104 Level Conversion Chip Provides Four Data Lines, mainly Used for Communication Interfaces Such as SPI, I²S, Bus Interface
- Jiangsu Runic Technology Won 2021 China Analog Semiconductor Outstanding Business Award
- Runic Technology Participates in the 2021 ASPENCORE Double Summit
- The RS3005 Chip Developed by Runic Technology Helped The System MCU to Complete The Power Supply
- Runic‘s OP Amp RS622,Analog Switch RS2105 and Low-Consumption LDO RS3236 Apply in Finger Clip Oximeter
- Level Shift RS0102 Provides Dual Data Lines, Which Are Mainly Used for Communication Interfaces Such as UART, I²C, SMBus, and GPIO
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.