Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor, Surface Mount Network, AEC-Q200 Qualified MPMA (Divider)
●Vishay Thin Film MPMA Series dividers provide ± 2 ppm/°C tracking and a ratio tolerance as tight as ± 0.05 %, small size,and exceptional stability for all surface mount applications. The standard SOT-23 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor elements. MPMA is AEC-Q200 qualified and ideal for high precision automotive applications. The ratios listed are available for off the shelf delivery. If you require a non-standard ratio,consult the applications engineering group as we may be able to meet your requirements.
●FEATURES
■AEC-Q200 qualified
■Resistance range 250 Ω to 50 kΩ
■Excellent long term ratio stability ± 0.03 % over 1000 h, 125 °C
■Ratio tolerances to ± 0.05 %
■Tracking as low as ± 2 ppm/°C
■Very low noise and voltage coefficient(< -30 dB, 0.1 ppm/V)
■Standard JEDEC TO-236 package variation AB
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT-23 |
|
English Chinese Chinese and English Japanese |
|
03-Nov-15 |
|
Revision: 03-Nov-15 |
|
60113 |
|
170 KB |
- +1 Like
- Add to Favorites
Recommend
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- ITT GBIV Electric Vehicle Charging Inlet Provides Low Contact Resistance and A Minimum of 10,000 Mating Cycles
- ITT EJCV Electric Vehicle Charging Connector Has A Current Rating Up to 32A
- ITT ECIV Electric Vehicle Charging Inlet Can Provide Low Contact Resistance and A Minimum of 10,000 Mating Cycles
- EPC Launches 2kW, 48 V/12 V DC-DC converter for More Efficient, Smaller, Faster, Bidirectional Converters for Mild-Hybrid Cars
- TT Electronics EBW5216 Busbar Shunt Resistors for High Current Measurements in The Hundreds of Amps Range
- How To Use An EPC Development Board to Evaluate The Performance of A Given GaN FET or IC in Common Applications?
- How to Design a 2 kW 48 V/12 V Bi-Directional Power Module with packaged eGaN® FETs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.