SOCAY Lanuched the NTC Thermistor SN0402X103F3950FB with 0402 Patch Package and the Temperature Detection Accuracy of can be ±0.1℃
A thermistor refers to a thermistor whose resistance decreases significantly with the rise of temperature and has a negative temperature coefficient.
The relationship between the resistance value and temperature of the NTC Thermistor is approximately in line with the exponential function law and can make a resistance-temperature characteristic curve, the resistance value, and temperature into a one-to-one corresponding relationship, using the resistance temperature characteristics of the NTC thermistor, the temperature can be calculated by measuring the resistance value, which is the basis of the temperature measurement of the NTC thermistor.
Typical Application :
SN0402X103F3950FB Parameters are as follows:
This device is 0402 patch package, small size, convenient PCB layout, 25℃ room temperature resistance is 10KΩ±1%, B(25/50℃)=3950±1%, resistance and B value accuracy are very high, error range is ±1%, can be accurate temperature compensation. At present, Shuokai's patch NTC adopts a mature thick film manufacturing process, printing a layer of thick (30μM) NTC ceramic material on the ceramic substrate, and then matching a special electrode structure, and then sintering.
Product features are as follows:
1、The overall thickness of the product is thin, and the reaction time to temperature is extremely fast.
2、Due to the thick film structure, the thermal shock caused by welding is very small, suitable for applications requiring high stability and reliability.
3、The resistance value can be corrected, and the temperature detection accuracy of the whole temperature range can be ±0.1℃.
4、The resistance value and B value adjustment of the product are less affected by the size and are more flexible.
5、The special end electrode structure can release the mechanical stress caused by thermal shock and circuit board bending, and the bending test has little impact on the performance of the product.
6、When thermal collapse occurs, it will be safely disconnected and the product will not overheat.
- 【Datasheet】SN0402 Series Chip NTC Thermistor
- 【Datasheet】SN0402-X Series Chip NTC Thermistor
- 【Datasheet】SN0402-X Series Chip NTC Thermistor
- 【Datasheet】SN0402 Series Chip NTC Thermistor
- +1 Like
- Add to Favorites
Recommend
- Protection Application of SOCAY Surge Suppression Resistor NTC in PD Fast Charging Charger
- The Role of Socay Electrostatic Diode SE05N6S21HB in Electronic Cigarettes
- Socay Metal Oxide Varistor 20D561K Surge Protection for Street Lamps Power Outputs
- SOCAY SC2E8-600ML Gas Discharge Tube Has A Higher Flow Rate of 10KA Surge Level, Used for Power Modules
- Socay Vehicle-specific Transient Suppression Diode TH8D33CA offers an Operating Voltage of 33V for OBD System
- Socay Gas Discharge Tube SC2E5-90LSMD Apply to GPS Antenna Port Surge Protection
- SOCAY New Car-specific TVS SM8E36A with an Operating Voltage of 36V are Used in Car Stereo Surge Test
- The Application of Socay NTC Thermistors in The Field of Temperature Measurement, The Temperature Measurement Range of Thermistors Can Reach -40 ℃ to +125 ℃
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.