SOCAY SC2E8-600ML Gas Discharge Tube Has A Higher Flow Rate of 10KA Surge Level, Used for Power Modules

2023-07-12 SOCAY News
gas discharge,EC600XG,SC2E8-600ML

Power modules are generally used in the field of industrial power supplies. Through the AC to DC power supply voltage conversion of the mains, the function of voltage reduction is realized, and the low-voltage products are normally supplied. Power modules usually need surge protection, and the general protection level ranges from 2000V to 10,000 V. At the 220AC input end of the power module, a 600V gas discharge tube and a pressure-sensitive series are generally used for common mode protection. The following is the application principle diagram of the gas discharge tube on the power module:



The gas discharge tube is used in power modules, there is an international brand 600V/5KA discharge tube on the market. This paper focuses on the recommendation of Shenzhen SOCAY Electronics Co., LTD. SC2E8-600ML gas discharge tube, This product can replace EC600XG and its typical parameters are compared as shown in the following table.



It can be seen from the comparison of the above main parameters that SC2E8-600ML has a higher flow rate than EC600XG, reaching the 10KA surge level. It can resist higher-level surge impact, and other parameters are basically the same. Overall, the performance is better.


Package and pin definition:



In summary, this SC2E8-600ML of SOCAY Electronics can replace EC600XG.

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: