Nippon Chemi-Con Added High Ripple Models to PSG Series Lead Type Conductive Polymer Aluminum Solid Capacitors Increasing 23 to 34% Rated Ripple Current
Nippon Chemi-Con has expanded the high ripple product lineup of its PSG Series of Lead Type Conductive Polymer Aluminum Solid Capacitors.
In the current PSG Series, the rated ripple current is 3,800mArms for the existing 16V 270μF, φ6.3×8mm capacitor. A large increase of 34% in this ripple current has been realized, raising the value to 5,080mArms. Further, in the 16V 560μF φ8×11.5mm capacitor, this has been increased by 23%, from 4,970mArms to 6,100mArms.
As personal computers and servers become smaller, downsizing and space saving are also demanded of the power supply units that supply power to these products. In addition, higher efficiencies are also required, and in order to meet these needs, the use of conductive polymer aluminum solid capacitors on the secondary sides of the power supplies is increasing.
In order to match these market trends, Nippon Chemi-Con has added models with even higher ripple currents to the current PSG Series capacitors, which were designed with high capacitance for use in power supplies, thereby reducing space requirements by reducing the number of secondary side smoothing capacitors, leading to a reduction in the size of power supply units and an increase in their efficiency.
Technical Advantages
High ripple current has been achieved by implementing the following two measures:
By reviewing the conductive polymer material and process methods, Nippon Chemi-Con could successfully form highly reliable and highly conductive polymers for 16V use and could realize even lower ESR levels.
By reviewing the internal element structure, and by optimizing the dimensions of the electrode foil, etc., Nippon Chemi-Con could reduce the ESR from a structural point of view.
Mass Production Schedule
High ripple models of the PSG Series were already being mass-produced.
Specifications
Category temperature range: -55℃~+105℃
Endurance: 5000 hours at 105℃
Features
Product Appearance
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Expanded PSG Series and PMA Series Conductive Polymer Aluminum Solid Capacitors with 25V High-capacitance Products and 35V Products
- Nippon Chemi-Con Added PSG Series Radial Lead Type Conductive Polymer Aluminum Solid Capacitors with High Capacitance
- Nippon Chemi-Con Expanded the Product Line of Radial Lead Type Conductive Polymer Aluminum Solid Capacitors PSG Series with Approximately 20% Higher Capacitance
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.