TDK’s ICP-20100 is the Lowest Power Barometric Pressure Sensor to Achieve NextNav Certification
The ICP-20100 ultra-low noise pressure sensor is now in mass production, available from distributors worldwide that carry InvenSense products
Perfect fit for 3D location services with its ability to accurately measure a height difference as small as 5cm
Suitable for smartphones, tablets, drones, AR/VR, and smart home appliances
TDK Corporation announces that the InvenSense ICP-20100, the latest generation of the SmartPressure™ MEMS Barometric Pressure Sensors, is now in mass production and has been certified by NextNav. Launched in 2021, the NextNav Certified process independently verifies the InvenSense sensor accuracy measurements, by engaging directly with component manufacturers to rigorously test sensors in real-world operating scenarios. NextNav Certified supports these manufacturers in measuring performance against higher standards, ultimately benefiting wireless phones, wearables, and other devices, providing strong performance assurance for hardware manufacturers utilizing the certified components. The ICP-20100 is the lowest power barometric pressure sensor to receive this certification.
ICP-20100 can operate over wide temperature ranges and deliver measurement accuracies required by a variety of applications including 3D geolocation and emergency location service (E911), mobile indoor/outdoor navigation, sport and fitness activity tracking, and altitude-hold in drones. The sensor enables extended battery life for always-on applications due to its extremely low power consumption.
“TDK’s first-generation barometric pressure sensor, ICP-10111, was the first to achieve NextNav certified status last year. ICP-20100, our second-generation barometric pressure sensor brings architectural innovation to deliver even higher accuracy at lower power,” said Uday Mudoi, Senior Director of Product Marketing at InvenSense, a TDK Group Company. “The NextNav certification of ICP-20100 assures our customers that TDK’s performance sensing solution will continue to enable smarter systems that deliver the best user experience.”
“Pressure sensor performance is critical to delivering accurate 3D location service for applications such as E911,” said Dan Hight, VP of Business Development and Partnerships at NextNav. “NextNav certification of InvenSense ICP-20100 demonstrates that the sensor performance clears a high bar and offers a solid choice to customers.”
The InvenSense SmartPressure™ Sensors use an innovative capacitive MEMS architecture to deliver industry-leading accuracy, long-term drift, temperature stability, and low power consumption. The ICP-20100 device combines a barometric pressure and a temperature sensor in a small 2.0 mm x 2.0 mm x 0.8 mm package. The device enables flexible user designs with multiple input voltage levels including 1.2V, 1.8V, and 3.3V, and a choice of I²C, I3CSM, and SPI interfaces. The ICP-20100 can be configured to achieve ultra-low noise or ultra-low power performance and has the versatility to perform anywhere in-between those thresholds. With ultra-low noise pressure sensing capabilities, the ICP-20100 can detect altitude changes of less than 5 cm.
A comprehensive development kit, DK-20100, and evaluation platform, EV_ICP-20100, are also available along with necessary software to enable quick-to-market development of customer systems. In addition to the ICP-20100, the ICP-10125, ICP-10101, and ICP-10111 pressure sensors are part of the SmartPressure™ Sensor family and are available from distributors worldwide that carry InvenSense products.
Main applications
Smartphones, tablets, E911
Leisure, sports, and fitness activity monitoring for wearable sensors
Altitude Control of Drones and Flying Toys
Virtual Reality and Gaming Equipment
Altimeters and barometers for portable devices
Indoor/outdoor navigation (dead-reckoning, floor/elevator/step detection)
Smart home appliances such as robotic vacuum cleaners
Main features and benefits
Pressure operating range: 30 to 110kPa
Pressure sensor temperature coefficient offset: ±0.5 Pa/℃
I²C, I³CSM, and SPI interface
FIFO, Interrupt, User configurable ODR/OSR
RoHS and Green compliant
- 【Datasheet】ICP-10125 Datasheet: High Accuracy, Low Power, 10atm Waterproof Barometric Pressure and Temperature Sensor IC
- 【Datasheet】ICP-10101 High Accuracy, Low Power, Barometric Pressure and Temperature Sensor IC
- 【Datasheet】ICP-20100 High Accuracy, Low Power, Barometric Pressure and Temperature Sensor IC
- 【Datasheet】ICP-10111 High Accuracy, Low Power, Barometric Pressure and Temperature Sensor IC
- 【Datasheet】DK-10125 SmartPressure™ Platform by InvenSense®
- 【Datasheet】ICP-20100 High Accuracy, Low Power, Barometric Pressure and Temperature Sensor IC
- 【Datasheet】DK-20100 Development Kit for ICP-20100 High-Accuracy, Low Power, Barometric Pressure and Temperature Sensor
- 【Datasheet】SmartBug™ Smart Multi-Sensor Wireless Module for IoT Applications
- 【Datasheet】TDK RoboKit1
- +1 Like
- Add to Favorites
Recommend
- TDK Announces Worldwide Availability of a New Generation of MEMS Barometric Pressure Sensor Platform
- TDK Announces the InvenSense ICP-10125 Waterproof SmartPressure™ Sensor Platform, Achieving the Industry’s Lowest Pressure Noise of 0.4 Pa RMS
- TDK Launches InvenSense Sensor Partner Program to Empower IoT innovation with Sensor Technology
- InvenSense® Provides High-Accuracy Turn-By-Turn Navigation User Experience To HiSilicon Mobile Platforms and Huawei Smartphones
- TDK’s New SmartMotion® Platform Accelerates Development of IOT Solutions Based on Invensense Motion Sensors
- InvenSense® Announces UltraPrint™ Mass-Manufacturable Ultrasound Fingerprint Touch Sensor Solution
- InvenSense® Ushers in the Era of Sensor System-On-Chip With the World’s First Integrated Motion Sensor and Multi-Core Processing
- InvenSense® Announces Contextual Awareness SDK for Embedded Developers and Mobile Devices
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.