ICP-10125 Datasheet: High Accuracy, Low Power, 10atm Waterproof Barometric Pressure and Temperature Sensor IC
■The ICP-10125 pressure sensor is based on MEMS capacitive technology, which provides ultra-low noise at the lowest power, enabling industry leading relative accuracy, sensor throughput, and temperature stability. The pressure sensor can measure pressure differences with an accuracy of ±1 Pa, an accuracy enabling altitude measurement differentials as small as 8.5 cm, less than the height of a single stair step.
■Consuming only 1.3 μA @1 Hz, the device is available in a small footprint 3.55 mm x 3.55 mm x 1.45 mm chimney package with waterproofing gel providing IPx8 waterproofing to 10 ATM. The ICP-10125 is ideally suited for wearable fitness monitoring and battery powered IoT.
■The ICP-10125 offers an industry leading temperature coefficient offset of ±0.5 Pa/°C. The combination of high accuracy, low power, temperature stability, waterproofing in a small footprint enables higher performance barometric pressure sensing for sports activity identification and mobile indoor/outdoor navigation.
●FEATURES
■Pressure operating range: 30 to 110 kPa
■Noise and current consumption
▲0.4 Pa @ 10.4 μA (ULN mode)
▲0.8 Pa @ 5.2 μA (LN mode)
▲3.2 Pa @ 1.3 μA (LP mode)
■Pressure Sensor Relative Accuracy: ±1 Pa for any 10 hPa change over 950 hPa-1050 hPa at 25C
■Pressure Sensor Absolute Accuracy: ±1 hPa over 950 hPa-1050 hPa, 0°C to 65°C
■Pressure Sensor Temperature Coefficient Offset: ±0.5 Pa/°C over 25°C to 45°C at 100 kPa
■Temperature Sensor Absolute Accuracy: ±0.4°C
■IPx8: Waterproof to 10 ATM
■Temperature operating range: -40 °C to 85 °C
■Host Interface: I²C at up to 400 kHz
■Single Supply voltage: 1.8V ±5%
■RoHS and Green compliant
High Accuracy, Low Power, 10atm Waterproof Barometric Pressure and Temperature Sensor IC 、 pressure sensor |
|
[ Smart watches ][ Leisure ][ Sports ][ Fitness Activity Monitoring ][ Wearable Sensors ][ Altimeters ][ barometers ][ portable devices ][ Indoor Navigation ][ Outdoor Navigation ][ dead-reckoning ][ floor detection ][ elevator detection ][ step detection ][ Home Automation ][ Building Automation ][ Weather Forecasting ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
HTCC-10L |
|
English Chinese Chinese and English Japanese |
|
04/09/2021 |
|
Revision: 1.1 |
|
DS-000329 |
|
2.1 MB |
- +1 Like
- Add to Favorites
Recommend
- TDK Announces the InvenSense ICP-10125 Waterproof SmartPressure™ Sensor Platform, Achieving the Industry’s Lowest Pressure Noise of 0.4 Pa RMS
- TDK’s ICP-20100 is the Lowest Power Barometric Pressure Sensor to Achieve NextNav Certification
- TDK Announces Worldwide Availability of a New Generation of MEMS Barometric Pressure Sensor Platform
- InvenSense® Provides High-Accuracy Turn-By-Turn Navigation User Experience To HiSilicon Mobile Platforms and Huawei Smartphones
- TDK’s New SmartMotion® Platform Accelerates Development of IOT Solutions Based on Invensense Motion Sensors
- InvenSense® Announces UltraPrint™ Mass-Manufacturable Ultrasound Fingerprint Touch Sensor Solution
- InvenSense® Ushers in the Era of Sensor System-On-Chip With the World’s First Integrated Motion Sensor and Multi-Core Processing
- InvenSense® Announces Contextual Awareness SDK for Embedded Developers and Mobile Devices
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.