ZF Product Insight – The KNX Light Switch Module

2024-10-18 ZF Electronics Official Website
KNX Light Switch Module,wireless light switch module,ZF Electronics

ZF’s wireless light switch module is versatile, easy to integrate and comes ready to install. It is compatible with standard energy harvesting light switch frames but can be customised too.


KNX Light Switch Module


The actuation of the unit produces enough electrical energy to transmit a complete KNX-RF protocol in S-mode directly to any KNX-receiver and is configurable with ETS 5.


• Frequency bands: 868.3
• Temperature range: -20 to +45℃ (-40 to +113℉)
• Operating distance: up to 30 m (in buildings)
• Operating force: > 10 N
• Protocol transmission time: approx. 19ms


The pushbutton module has four contact points which are covered by a bezel with one or two rockers. This enables a customized programming according to rooms and desired usage. This means that the KNX RF module can be used as a 2-, 4- or 6-fold pushbutton module. Usually, the module is used as a 4-fold pushbutton module with the functions light on/off and shutter up/down.

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: