KNX manual of KNX presence detector PresenceLight 180x-KNX, PresenceLight 360x-KNX

2021-07-16
●Functional characteristics
■PresenceLight 180/360 KNX presence detector
▲Presence detector switches or controls a maximum of two lighting groups dependent on the presence of persons and the current brightness. A brightness level is defined for this, the second light group is then switched or controlled with a brightness difference. With brightness-dependent switching, the lighting is switched on for an adjustable length of time if movement is detected in detection area and there is insufficient light.
▲With constant light control, the lighting is controlled to constant accumulated brightness of artificial light and daylight if movement has been detected in the detection area
▲An additional channel transmits the presence information in the room to further devices such as heating, ventilation or blinds controls. The channel has a switch-on delay and a switch-off delay.
▲Another channel is for room monitoring, the presence of persons is shown with a high degree of certainty.
▲The presence detector also has another integrated scene component as well the possibility of processing scene numbers for both lighting groups.
▲In combination with the remote control, the presence detector is not only capable of switching and dimming its own lighting groups but also other external consumers such as lights, blinds etc.
■Features
▲Optional control of one or two light channels
▲Optional constant light control or brightness-dependent switching
▲Brightness-dependent switching with dimming values override
▲Reduction of switch-off delay time in the event of short presence
▲Separate channel (presence) for controlling other devices such as HVAC systems with delayed switch-on and switch-off delay
▲Separate channel for room monitoring with cyclical report object
▲Parallel connection Master-Slave for complete coverage of large areas
▲Parallel connection Master-Master for several lighting groups with separate light measurement but joint presence detection
▲Separate disable objects for light and presence channel
▲Scene control with two scenes
▲Scene functionality with scene numbers
▲Detection and sending of current brightness
▲Adjustable dimming value at standby
▲Two brightness level options
▲Setting of brightness level via bus object
▲SendoPro management remote control (optional)
★ Changing of parameters
▲SendoClic user remote control (optional)
★ Lighting groups individual switching and dimming
★Two programmable scenes
★ Optional control of blinds or external channels

Theben

PresenceLight 180x-KNXPresenceLight 360x-KNX200 9 051200 9 821200 9 822200 9 050200 9 815200 9 816200 9 001200 9 818200 9 819200 9 000200 9 812200 9 813907 0 606907 0 607907 0 608907 0 513907 0 634907 0 635907 0 570907 0 520907 0 675907 0 690PresenceLight 180A-KNX WHPresenceLight 180A-KNX BKPresenceLight 180A-KNX SRPresenceLight 180B-KNX WHPresenceLight 180B-KNX BKPresenceLight 180B-KNX SRPresenceLight 360A-KNX WHPresenceLight 360A-KNX BKPresenceLight 360A-KNX SRPresenceLight 360B-KNX WHPresenceLight 360B-KNX BKPresenceLight 360B-KNX SRSurface frame PresenceLight 40BKSurface frame PresenceLight 40SRSurface frame PresenceLight BKSurface frame PresenceLight SRSendoPro 868-ASurface frame PresenceLight 40WH

More

Part#

presence detector

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

09.2011

1.5 MB

- The full preview is over. If you want to read the whole 50 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: