A Low-Power RS-485 Transceiver MAX3485 Compliant With TIA/EIA-485 Standards
1. RS485 Bus Principle
Due to the difference in voltage levels between RS485 and TTL standards, voltage level conversion chips are required to achieve data conversion between the two.
RS-485 employs balanced transmission and differential reception to facilitate communication. Because twisted-pair cables are commonly used for transmission lines and they offer differential inputs, RS-485 exhibits strong immunity to common-mode interference. Operating in half-duplex mode, RS-485 supports multi-point data communication. The typical bus network topology adopts a bus-type structure with terminal matching, where a single bus interconnects various nodes. RS-485 bus networks typically support up to 32 nodes, although specialized RS-485 chips can achieve a maximum of 128 or 256 nodes, with some capable of supporting up to 400 nodes.
2.The Key Features of XBLW MAX3485 RS-485 transceiver:
- Operates with 3-5V power supply and in half-duplex mode.
- Supports up to 256 devices connected to the bus with 1/8 unit loads.
- Driver short-circuit output protection and receiver open-circuit fail-safe protection.
- Includes thermal shutdown and low-power shutdown functions.
- Exhibits strong noise immunity and integrated transient voltage suppression capability.
- Electrostatic discharge (ESD) protection up to ±15KV HBM ESD.
- Data transmission rates up to 10Mbps in electrically noisy environments.
- Common-mode input voltage range from -8V to 13V.
3.Pin Definitions and Package Type.
Typical Application Circuit
Applications
The MAX3485, as a
low-power, high-speed, and multi-protected RS485 transceiver,
outperforms similar products in performance and finds wider
applications. It provides strong modular support for circuit performance
upgrades. In the future, Cyberler will develop more outstanding
products.
- +1 Like
- Add to Favorites
Recommend
- XBLW Showcased Linear Voltage Regulator XBLW AMS1117, RS-485/RS-422 Chip MAX3485 and Other Product in 2023 ES SHOW
- XBLW Xinbole Analog Chips: Signal Chain Chips (Part 3)
- Real-Time Clock (RTC) Chips XBLW DS1302 ＆ DS1307: Powerful And Reliable
- Programmable Resolution Single-Bus Temperature Sensor - XBLW DS18B20 Offers Temperature Measurement With A Resolution of 9 To 12 Bits
- The Linear Regulator XBLW AMS1117 with Output Current Capability up to 1A and Output Voltage Accuracy of ±1.5%
- XBLW LMV3X Series Low Voltage Rail-To-Rail Output General Purpose Operational Amplifiers With 1MHZ General Gain Bandwidth
- XBLW High-Performance Hall-Effect Current Sensor GT712 with Operating Voltage of 4.5V~5.5V and Isolation Voltage of 2500V
- XBLW High-Performance Low Noise Dual Op-Amp NE5532 with a Small Signal Bandwidth of 10MHz and Conversion Rate of 7V/μs
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
