XBLW High-Performance Hall-Effect Current Sensor GT712 with Operating Voltage of 4.5V~5.5V and Isolation Voltage of 2500V
The XBLW GT712 Is A High-Performance Hall-Effect Current Sensor That Can Measure Alternating Current (AC) Or Direct Current (DC) More Efficiently For A Wide Range Of Industrial, Consumer And Communications Devices.
The GT712 Series Integrates A High-Precision, Low-Noise Linear Hall Circuit And A Low-Impedance Main Current Loop Wire. When The Sampling Current Flows Through The Main Current Loop, The Magnetic Field Generated By It Induces The Corresponding Electrical Signal On The Hall Circuit, And The Voltage Signal Is Output Through The Signal Processing Circuit, So That The Output The Product Strictly To The Measured Current Value.
The Linear Hall Circuit Is Produced Using An Advanced BCDMOS Process, Which Includes A High Sensitivity Hall Sensor, Hall Signal Pre-Amplifier, High Precision Hall Temperature Compensation Unit, Oscillator, Dynamic Offset Cancellation Circuit And Amplifier Output Module. In The Absence Of Magnetic Field, The Static Output Of The Current Sensor Is 50% VCC. Under The Condition Of 5V Power Supply Voltage, The Static Output Of The Sensor Can Change Linearly With The Magnetic Field Between 0.2~4.8V, And The Linearity Can Reach 0.4%.
01 Product Characteristics
●Operating Voltage: 4.5V ~ 5.5V
●Static Common Mode Output Point:50%VCC
●Wide Measuring Range: 5A/20A/30A
●Isolation Voltage: 2500V
●High Bandwidth: 120kHz;
●Output Response Time: 4μs (Typical Value);
●Stability In The Working Range: 1.5%@25℃~150℃; @ 1% To 40℃ To 25℃;
●Low Noise Analog Signal Path;
●Strong Anti-Interference Ability;
●Strong Resistance To Mechanical Stress, Magnetic Field Parameters Are Not Deviated By External Pressure;
●ESD(HBM):5kV;
●Operating Temperature: -40℃~150℃;
●RoHS Certification: (EU) 2015/863
●Proportional Output, Two-Way Current
02 Internal Functional Block Diagram
03 Package And Pin Definition
04 Electrical Parameter
05 Typical Application Circuit
06 Application Areas And Products
●Inverter Current Detection
●Motor Phase Current Detection (Motor Control)
●Photovoltaic Inverter
●Battery Load Detection System
●Current Transformer
●Switching Power Supply
●Overload Protection
1、Hall Current Sensor Products
2、Industrial Power Current Measurement
3、Photovoltaic Inverter
4、Battery Load Measuring Instrument
5、Current Transformer
07 Sum Up
At Present, the XBLW Chip Level Current Sensor Has Been Widely Used In Frequency Converter, Power Measurement, Automotive Electronics, Servo Drive, Controller And Other Industrial Control Fields, Price And Volume, Quality And So On Have Absolute Advantages.
- +1 Like
- Add to Favorites
Recommend
- A Brief Discussion On The Use Of Current Sensors - Taking XBLW GT712 As An Example
- XBLW Showcased Linear Voltage Regulator XBLW AMS1117, RS-485/RS-422 Chip MAX3485 and Other Product in 2023 ES SHOW
- Application Of XBLW Products On Fascia Guns
- Xinbole (XBLW) Attended the Shanghai Munich Electronics Show, July 8-10, 2024
- XBLW LM2576S Series Is A New 3A Current Output Buck Switch Regulated Integrated Circuit
- Real-Time Clock (RTC) Chips XBLW DS1302 & DS1307: Powerful And Reliable
- 20V 5A DC Bidirectional Motor Driver Circuit Chip - XBLW CP2119, with A Working Voltage Range of 3V to 20V, Compatible for SS6285L
- Programmable Resolution Single-Bus Temperature Sensor - XBLW DS18B20 Offers Temperature Measurement With A Resolution of 9 To 12 Bits
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.