XBLW 74HC/HCT192 Synchronous BCD Up/Down Counter

PublishTime：2023-11-02

●The SN74HC/HCT192 is a synchronous BCD up/down counter. Separate up/down clocks, CPU and CPD respectively, simplify operation. The outputs change state synchronously with the LOW-to-HIGH transition of either clock input. If the CPU clock is pulsed while CPD is held HIGH, the device will count up. If the CPD clock is pulsed while CPU is held HIGH, the device will count down. Only one clock input can be held HIGH at any time to guarantee predictable behavior. The device can be cleared at any time by the asynchronous master reset input (MR); it may also be loaded in parallel by activating the asynchronous parallel load input (PL).
●The terminal count up (TCU) and terminal count down (TCD) outputs are normally HIGH. When the circuit has reached the maximum count state of 15, the next HIGH-to-LOW transition of CPU will cause TCU to go LOW. TCU will stay LOW until CPU goes HIGH again, duplicating the count up clock Likewise, the TCD output will go LOW when the circuit is in the zero state and the CPD goes LOW. The terminal count outputs can be used as the clock input signals to the next higher order circuit in a multistage counter, since they duplicate the clock waveforms. Multistage counters will not be fully synchronous, since there is a slight delay time difference added for each stage that is added.
● The counter may be preset by the asynchronous parallel load capability of the circuit. Information present on the parallel data inputs (D0 to D3) is loaded into the counter and appears on the outputs (Q0 to Q3) regardless of the conditions of the clock inputs when the parallel load (PL) input is LOW. A HIGH level on the master reset (MR) input will disable the parallel load gates, override both clock inputs and set all outputs (Q0 to Q3) LOW. If one of the clock inputs is LOW during and after a reset or load operation, the next LOW-to-HIGH transition of that clock will be interpreted as a legitimate signal and will be counted. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
● Features
■Input levels:
▲For SN74HC192: CMOS level
▲For SN74HCT192: TTL level
■Synchronous reversible counting
■Asynchronous parallel load
■Asynchronous reset
■Expandable without external logic
■Specified from -40°C to +85°C
■Packaging information: DIP16/SOP16/TSSOP16

Brand of Product：	XBLW
Part#：	XBLW 74HC 、 XBLW 74HCT192 、 SN74HC 、 SN74HCT192 、 SN74HC192N 、 SN74HC192DTR 、 SN74HCT192DTR 、 SN74HCT192TDTR More Part#
Product Category：	Synchronous BCD Up/Down Counter More
Application：	More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：	DIP16;SOP16;TSSOP16;DIP-16;SOP-16;TSSOP-16
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2023/6/15
Version Number：	version1.0
Data Encoding：
Data Size：	2.1 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 22 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits