-40V/-7.5A P-channel Enhanced Mode Power MOSFET SW028P04VT for DC-DC Converter, Motor Control
This SEMIPOWER P-channel Enhanced mode power MOSFET SW028P04VT is produced with advanced technology of SAMWIN. This technology enable the power MOSFET to have better characteristics, including fast switching time, low on resistance, low gate charge and especially excellent avalanche characteristics.
Features
High ruggedness
Low RDS(ON):
(Typ 27mΩ)@VGS=-4.5V
(Typ 21mΩ)@VGS=-10V
Low Gate Charge (Typ 60nC)
Improved dv/dt Capability
100% Avalanche Tested
Application:
DC-DC Converter
Motor Control
Absolute maximum ratings
Thermal characteristics
Electrical characteristic (TJ=25℃ unless otherwise specified)
Source to drain diode ratings characteristics
Notes
1. Repetitive rating: pulse width limited by junction temperature.
2. L =9.8mH, IAS=-7.5A, VDD=-24V, RG=25Ω, Starting TJ= 25℃
3. ISD≤-7.5A, di/dt=100A/μs, VDD≤ BVDSS, Staring TJ=25℃
4. Pulse Test : Pulse Width≤300μs, duty cycle≤2%.
5. Essentially independent of operating temperature.
Order Codes
- +1 Like
- Add to Favorites
Recommend
- 30V/250A N-channel Enhanced Mode Power MOSFET SW015R03VLT for Synchronous Rectification, Li Battery Protect Board and Inverter
- 30V/85A N-channel Enhanced Mode Power MOSFET SW051R03VLT for Synchronous Rectification, Li Battery Protect Board, Motor Drives
- 500V/20A N-channel Enhanced mode TO-220F/TO-247 MOSFET SW20N50D for Charger, Adaptor and LED
- Semipower Select Keysight‘s Power Device Testing Solution to Develop Next Generation Semiconductors
- PCIe® 6.0: The Next Evolution of PCIe
- KEYSIGHT Article Column: On the Principles of Communication
- LinkSense and Sekorm Announced a Distribution Agreement That Brings Pressure Sensors and More
- SOT-23 P-channel MOS BSS84 : Cost Effective Solutions for Low-voltage Applications Requiring a Low-current High-side Switch
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.