Nisshinbo Low Power Boost DC/DC Converter R1810 for Energy Harvesting

PublishTime： 2023-07-21 Article Source：NISSHINBO

Nisshinbo Group R1810 Boost DC/DC Converter is a complete energy harvesting solution designed for powering low current-consuming IoT devices by extracting energy from Photovoltaic cells. Target applications include wireless sensors, home, and building automation, remote monitoring, presence detection, industrial equipment controls, and more.

Alternative power supplies replacing conventional batteries are nowadays immensely popular, autonomous operating wireless devices significantly reduce the cost and labor of regular maintenance to replace batteries. Such power supplies operate with photovoltaic cells that usually supply a voltage that is way below the desired operating voltage for the application, therefore a special circuit is required that collects, converts, and stores energy in an external energy storage capacitor, followed by regulation of the output voltage to the required level.

The R1810 is specially tailored for this purpose and starts up with the only 9µW provided from a single-cell photovoltaic element, the start-up voltage is only 0.5 V, and once started, the operation continues even if the input voltage drops below 0.2 V. It has a high-efficiency performance of 66% at 5 µA output current (Vin=0.5V, Vset=2.6V).

The advanced R1810 has an internally fixed maximum power point voltage (VMP) and output voltage setting (VSET) to optimize the performance of the electrical circuit concerning the selected energy harvester type. Once sufficient energy is available on the input and increases above the VMP level, the boost DC/DC Converter will transfer energy from input to output. When the amount of transferred power exceeds the supplied power from the photovoltaic cell, the input voltage decreases below VMP and the DC/DC converter stops switching.

Two monitoring circuits indicate the status of the conversion process on the respective outputs, the Input Power Good function becomes active when the output voltage level falls below the VOUTUVLO voltage and whether the DC/DC converter stops switching for at least 1.5 seconds. Another Output Power Good function indicates that the output voltage level drops below 50 to 80% of its nominal level, this threshold is internally set and specified by the product version.

A built-in reverse current protection is enabled to prevent a current flow from output to input when the light on the photovoltaic cell is blocked. As soon the input voltage drops below the output voltage, the high-side MOSFET transistor is turned off to avoid a reverse current draining the energy storage capacitor. The R1810 is available in a regular DFN2735-14 or a tiny WLCSP-15-P1 package.

About Nisshinbo

New Japan Radio Co., Ltd. and Ricoh Electronic Devices Co., Ltd. of the Nisshinbo Group were integrated and started operation as Nisshinbo Micro Devices Inc. in January 2022. Nisshinbo integrated the strengths of both companies and refine "Connect Everything" technology, and, therefore, strives for further growth and development as an "Analog Solution Provider toward the realization of an ultra-smart society.

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

New Products & Solutions

More>

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Integrated Circuits