Selection and Detection of Fiber Optic Patch Cord

2023-09-25 T&S News
fiber optic cable patch cord,Fiber Optic Patch Cord,single-mode optical fiber,multimode optical fiber

fiber optic cable patch cord is widely used in communication rooms, home optical fiber, local area networks, optical fiber sensors, optical fiber communication systems, optical fiber connections, transmission equipment, etc. It is suitable for cable TV, telecommunication, computer optical fiber, and optical test equipment.


Ⅰ. Selection of fiber optic cable patch cord

According to the termination type, the Fiber Optic Patch Cord types mainly are ST-ST, SC-SC, and ST-SC. According to the kind of optical fiber, there are mainly single-mode optical fiber and multimode optical fiber.


The fiber optic cable patch cord length specifications include 0.5m, 1m, 2m, 3m, 5m, 10m, etc.


According to the material of the outer cable sheath, it can be divided into ordinary type, ordinary flame retardant type, low smoke halogen-free type (lzsh), low smoke halogen-free flame retardant type, etc. According to the fire rating of buildings and fire resistance requirements for materials, corresponding measures shall be taken for the generic cabling system.


Flame retardant cables and optical cables shall be used for laying cables or optical cables in flammable areas and building shafts. Flame retardant, low smoke, and low toxicity cables or optical cables should be used in large public places; Flame retardant wiring equipment shall be used in adjacent equipment rooms or handover rooms.


Ⅱ. How to check whether the fiber optic patch cord is qualified

Firstly, use the light pen to measure whether the patch cord is lit and confirm that the optical fiber is not broken. Then use the plug-back loss instrument to test. General carrier level test indicators: insertion loss is less than 0.3dB, and return loss is greater than 45dB.


The performance test of the fiber optic patch cord is divided into:

1. Optical performance test

Including the return loss/insertion loss test. The test instrument can use the return loss/insertion loss integrated tester.


2. End face geometry test

The parameters tested include a radius of curvature, vertex offset, fiber height, etc. The test instrument is an interferometer.


3. Scratch detection of the optical fiber end face

The video optical fiber magnifying glass can give the clearest image for observation, and the operation is effortless. Some customers also use a variable magnification to detect. The instrument integrates 400, 200, and 80 magnification, which can clearly and conveniently observe the end face of optical fiber and plug-in end face. Of course, you can also use relevant software for automatic inspection.


4. Optical fiber tension test

It is necessary to test the tensile force that the optical fiber connector can withstand.


5. Ambient temperature experiment

It is necessary to test the performance index of optical fiber connectors under different ambient temperatures.


As an experienced fiber patch cord manufacturer, T & S communications quality control includes a set of methods to maintain standards in the production line and each process.  T & S communications integrate quality control into methods, equipment, techniques, and products and always conducts spot checks on products or procedures for daily inspection to maintain standards. 

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: