OpDAT MV Highly Flexible Distributor Housing from METZ CONNECT is Designed for Fiber Optic and Copper Applications
The OpDAT MV is a highly flexible distributor housing for fiber optic and copper applications, which can be equipped with modular components to suit your individual needs. The IP54 variant of the lightweight plastic housing has 2 separately lockable doors which allow the separation of the installer area from the customer area without affecting the flexibility of further distribution. The IP65 variant has a screw-on cover that provides a high level of protection against dust and water, allowing it to be used in harsher environments.
Properties
Up to 18 fiber optic connectors or 12 module slots
Alternative: Perforated sheet for flexible equipment
Stackable housings for more capacity
Single circuit cassettes for crimp or shrink splices
Space for up to 144 splices
12x M12/M16 and 2x M20/M25 cable inputs
Variable cable outputs for patch cables with different diameters
IP54 version sealable and with two separate lockable doors
IP65 variant for harsh environments
Mounting option for gas blockers and microducts
Strain relief for incoming and outgoing cables
Elegant design from METZ CONNECT
Plastic housing in white (RAL 9010)
Dimensions (W x H x D): 360 x 302.5 x 87.5 mm
Basic housing
The base of the OpDAT MV is a robust plastic housing with different cable inlets and outlets. Depending on the desired IP protection there are 2 variants of the housing:
The IP54 variant has 2 separately lockable doors separating the installation side from the customer side. This installer/customer separation protects the installer's work from unauthorized access by third parties, while the end user still has the ability to access the patch panel unhindered. Each IP54 housing is factory-fitted with slotted foam to protect the outgoing connections from dust.
The IP65 variant has a screw-down cover. This ensures protection against water and dust even in harsher environments. To protect the connectors of the outgoing cables, the IP65 housing is equipped with an ICOTEK® frame, which can be equipped with various inserts.
With the elegant and simple design of METZ CONNECT, the housings fit discreetly into any environment.
Equipment variants
The 5 equipment variants provide the basis for the most common applications. The selection of accessories enables you to further adapt these configurations to your application if required. All equipment variants are available in both IP54 and IP65 versions.
Stackable
To increase the capacity of the housings, the housings can be lined up and completed with the Ø 34mm connector.
Application examples
Multi-family house 4x4+2
Campus
Multimedia
Industry
Ordering information
- +1 Like
- Add to Favorites
Recommend
- METZ CONNECT‘New OpDAT MTP® Cable Assemblies with Transmission Rates Up to 40 or 400GBit/s
- German connector brand METZ CONNECT reached a partnership with Sekorm
- METZ CONNECT Offers Customizable Smart Cabling Solution for Intelligent Meter Systems
- METZ CONNECT‘s OpDAT Wall-Mounted Distributor for Apartment Buildings with up to 30 Residential Units
- METZ CONNECT Offers FO Connectors with Grade B and a Max. Insertion Loss of 0.25dB
- METZ CONNECT Connection Terminals Alternate to RJ45 Or M12 Connectors, Suitable For Industrial Ethernet Systems
- Control Cabinet Construction 4.0 – Digital Device Data from METZ CONNECT
- Reconnectable METZ CONNECT Terminals Suitable for IoT/IIOT Devices, up to 10 Gbit/s Data Transmission
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.