METZ CONNECT‘s OpDAT Wall-Mounted Distributor for Apartment Buildings with up to 30 Residential Units

2023-02-28 METZ CONNECT News
Wall distributor,OpDAT wall-mounted distributor,1503397A06-C,1503397A12-C

Universally applicable distribution boxes for floor wiring or as a house distribution point in the equipment room. Now also a distribution cabinet for apartment buildings with up to 30 residential units.

The new variant of the OpDAT wall-mounted distributor serves as a distribution cabinet for apartment buildings with up to 30 residential units. The strain relief system in combination with the single circuit, cassettes allows easy handling and a separate splice area for each residential unit.


Features

· up to 5 single circuit splice cassette blocks, each with 6 splice cassettes, enable the fibers of each individual housing unit to be deposited and spliced separately

· each splice cassette is equipped with 4 pigtails each. The pigtails are deposited separately and ready for splicing

· each LC-Q coupling can be directly assigned to a splice cassette and thus to a housing unit

· the innovative cable support ensures a safe strain relief of the incoming cables

· of the incoming cables

· in the patch area, incoming patch cables can be safely inserted and plugged in from above or below through a foam cable guide.

· alternatively, a pre-assembled cable can be screwed in and intercepted as a connection between the house transfer point and the Wall distributor

· wall distributor size M

· labeling fields in the doors


Application example

Apartment building with individual ADTs

Equipment variants

· equipped with single circuit splice cassette blocks, couplers, and pigtails

· each splice cassette block has 6 splice cassettes

· each splice cassette is equipped with 4 pigtails. The pigtails are stored and ready for splicing. Pigtail connectors cleaned and plugged into couplers, assigned according to color code IEC 6030

· included in delivery:

-cable entry brush strip

-3x stackable strain reliefs for up to 12 cables each

-foam cable entry for patch cables

-mounting set for wall mounting


Ordering information – Wall distributor for apartment buildings

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: