±12K ESD Protection, Full Fail-Safe RS-485 Transceiver TP8485E

2021-08-09 3PEAK
RS-485 Transceiver,RS-485 Transceiver,TP8485E,TP8485E

3PEAK's TP8485E are 3V~5.5V powered transceivers that meet the RS-485 and RS-422 standards for balanced communication. Driver outputs and receiver inputs are protected against ±12kV ESD strikes without latch-up. Transmitters in this family deliver exceptional differential output voltages (2.5V min/5Vcc), into the RS-485 required 54Ω load, for better noise immunity, or to allow up to eight 120Ω terminations in “star” topologies. These devices have very low bus currents so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters. Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus. Rx outputs feature high drive levels - typically 25mA @ VOL = 1V (to ease the design of optocoupled isolated interfaces). 


The TP8485E is available in a SOIC-8 and MSOP-8 package, and is characterized from –40°C to 125°C.


Features 

●Exceeds Requirements of EIA-485 Standard 

●Hot Plug Circuitry - Tx and Rx Outputs Remain Three-State During Power-up/Power-down 

●Data Rate: Up to 250 kbps 

●Full Fail-safe (Open, Short, Terminated) Receivers 

●Up to 256 Nodes on a Bus (1/8 unit load) 

●Wide Supply Voltage 3V to 5.5V 

●SOIC-8 Package for Backward Compatibility 

●Bus-Pin Protection: 

– ±12 kV HBM protection


Applications 

●E-Metering Networks 

●Industrial Automation 

●HVAC Systems 

●Process Control 

●DMX512-Networks 

●Battery-Powered Applications 

Pin Configuration (Top View)



Exceptional Tx Drives Up To 256 Loads While Still Delivering 2.5V VOD.


Order Information


  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: