TP8485E ±12K ESD Protection, Full Fail-Safe RS-485 Transceiver
The TP8485E are 3V~5.5V powered transceivers that meet the RS-485 and RS-422 standards for balanced communication. Driver outputs and receiver inputs are protected against ±12kV ESD strikes without latch-up.
Transmitters in this family deliver exceptional differential output voltages (2.5V min/5Vcc), into the RS-485 required 54Ω load, for better noise immunity, or to allow up to eight 120Ω terminations in “star” topologies. These devices have very low bus currents so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters. Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus. Rx outputs feature high drive levels - typically 25mA @ VOL = 1V (to ease the design of optocoupled isolated interfaces).
The TP8485E is available in an SOIC-8 and MSOP-8 package, and is characterized from –40°C to 125°C.
●Features:
■ Exceeds Requirements of EIA-485 Standard
■ Hot Plug Circuitry - Tx and Rx Outputs Remain Three-State During Power-up/Power-down
■ Data Rate: Up to 250 kbps
■ Full Fail-safe (Open, Short, Terminated) Receivers
■ Up to 256 Nodes on a Bus (1/8 unit load)
■ Wide Supply Voltage 3V to 5.5V
■ SOIC-8 Package for Backward Compatibility
■ Bus-Pin Protection: – ±12 kV HBM protection
Full Fail-Safe RS-485 Transceiver 、 powered transceivers 、 Transmitters |
|
[ E-Metering Networks ][ Industrial Automation ][ HVAC Systems ][ Process Control ][ DMX512-Networks ][ Battery-Powered Applications ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOIC-8;MSOP-8;SOIC;MSOP |
|
English Chinese Chinese and English Japanese |
|
|
|
Rev. D |
|
|
|
1.6 MB |
- +1 Like
- Add to Favorites
Recommend
- ±12K ESD Protection, Full Fail-Safe RS-485 Transceiver TP8485E
- 3PEAK‘s Automotive-Grade Test Center Officially Commences Operations
- 3PEAK Isolation Products Are Certified to a Full Range of Safety Standards Including VDE, TÜV, UL, CSA, CQC, and CB
- The Only Company in China Included in the IBEE ESD Report! 3PEAK‘s Complete Series of Automotive CAN Transceivers in Mass Production
- 3PEAK Achieves ISO 26262:2018 ASIL D Process Certification, the Highest Level of Automotive Functional Safety
- 3PEAK Partners with IAR to Build a New Embedded Development Ecosystem Basing on Mainstream TPS32 Series MCUs
- 3PEAK Wins Prestigious VDE Premium Quality Award
- 3PEAK Unveiled a Next-Generation Automotive-grade High-current Linear Regulator TPL8151Q Supporting Wide Range Input of 29V
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.