RM590 Series Synchronous Buck DC/DC Module with VFM/PWM Control and Built-in Inductor,Optimized for Use in Industrial and Consumer Applications
RM590 series, a Synchronous Buck DC/DC Module with a built-in inductor which is optimized for use in industrial and consumer applications.No complex wiring required, enabling compact board design with ease.
These days, as electronic products become smaller, it becomes more difficult to mount electronic components on a limited mounting area, which makes designers pay attention to designing and wiring a DC/DC converter board, especially when they cannot construct a recommended pattern due to limited mounting area. In addition, they need to consider the countermeasures against radiation noise generated from a DC/DC switching regulator for electronic systems using electromagnetic waves.
The RM590 series is a module which contains a synchronous buck DC/DC switching regulator with oscillator frequency of 6 MHz and an inductor. It adopts small QFN2220-8 package the size of which is 2.2 x 2.0 x 1.5 mm. The RM590 requires only two external capacitors, which removes the necessity of complex wiring and enables designing a compact board with ease. In addition, it also makes radiation noise countermeasures easier, because the RM590 helps reduce radiation noise.
The RM590 series is manufactured at our Yashiro Plant (Kato City, Hyogo), and its inductor is manufactured by one of our group companies. The RM590 is scheduled to be applicable for our Product Longevity Program, maintaining state of supply for 10 years, which leads to relieve customer’s concern on the end of life of products including the inductor.
The input voltage range is from 2.3 V to 5.5 V with a maximum rating of 6.5 V. The RM590 series has two output voltage types: one is the fixed type, an internally fixed output voltage, and the other is the adjustable type, an output voltage variable with external resistors.
The output current is maximum 400 mA. To achieve high conversion efficiency even at light load, the RM590 can automatically switch its operation mode between VFM (Variable Frequency Modulation) and PWM (Pulse Width Modulation) depending on the load current. This function enables the IC to operate with high efficiency at both heavy and light load.
RM590 Series (QFN2220-8)
Key Features of RM590 Series
1. DC/DC Switching Regulator IC and Inductor Organized in One Module
The RM590 series is a product which included a synchronous buck DC/DC switching regulator with oscillator frequency of 6 MHz and an inductor in a module. It adopts small QFN2220-8 package the size of which is 2.2 x 2.0 x 1.5 mm. Furthermore, it requires only two external capacitors, which removes the necessity of complex wiring and enables designing a compact board with ease.
2. Automatic PWM/VFM Switching for High Efficiency at Both Heavy and Light Load
The RM590 series can automatically switch its operation mode between VFM (Variable Frequency Modulation) and PWM (Pulse Width Modulation) according to load current to convert efficiently even at light load. This function enables the IC to operate with high efficiency at both heavy and light load. In addition to its small package, the RM590 series can achieve low quiescent current of as low as 15 µA and high conversion efficiency at the same time.
3. Reducing Radiation Noise by Including Inductor
When using DC/DC switching regulators to electronic systems using electromagnetic waves, you need to take countermeasures on radiation noise generated from the DC/DC switching regulator. The noise from the DC/DC converter is radiated outside through wires. Therefore, the shorter the wires are, the less the noise becomes. By having a DC/DC switching regulator IC and an inductor inside, the RM590 series can shorten the length of wiring and thus make it easier to construct PCB layout to reduce noise than conventional products requiring an external inductor.
Comparation of radiation noise
4. Reducing Output Ripple Noise with High Oscillator Frequency of 6 MHz
The RM590 series has an oscillator frequency of 6 MHz to minimize ripples which are output noise. This makes the module even usable as a power source for devices with high noise sensitivity.
About Nisshinbo
New Japan Radio Co., Ltd. and Ricoh Electronic Devices Co., Ltd. of the Nisshinbo Group were integrated and started operation as Nisshinbo Micro Devices Inc. in January 2022. Nisshinbo integrated the strengths of both companies and refine "Connect Everything" technology, and, therefore, strive for further growth and development as an "Analog Solution Provider toward the realization of an ultra-smart society.
- +1 Like
- Add to Favorites
Recommend
- Nisshinbo Launched Development of First MUSES-Series High-sound-quality Power Management IC
- NISSHINBO‘s 600nA Low Quiescent Current Boost DC/DC Converter for Energy Harvester
- RM590 Series 400mA PWM/VFM Synchronous Buck DC/DC Converter Module with Integrated Inductor
- Visit Nisshinbo at 2024 IEEE MTT-S International Microwave Symposium at June 18 through June 21, 2024
- NISSHINBO Launched 0.5A/1A 6MHz PWM/VFM Step-down DC/DC Converter RP539 Series with Synchronous Rectifier
- Started Solution Business Using “Odor Sensing Platform“, Nisshinbo Signed Joint Development Agreement with Ainos and Taiwan Inabata Sangyo
- Now Available: Nisshinbo NL8802,a Low Noise, Dual, High-Quality Sound Audio Operational Amplifier
- Nisshinbo and KIT Have Started the Development of Radio Frequency Rectifier IC Focused on Microwave Wireless Power Transfer Systems
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.