Nippon Chemi-Con FL-V Series Common Mode Choke Coils with High-performance, Small-size Products and High-magnetic Permeability
Nippon Chemi-Con has developed Common Mode Choke Coils FL-V Series with permeability at 100kHz increased to 200% compared to conventional products. The Series contributed to the downsizing of switching power supplies and inverter power supplies.
Nippon Chemi-Con has commercialized the FL Series as common mode choke coils using nanocrystalline for magnetic material and sold them as noise filters for power supply input/output and DC line noise filters.
The FL-V Series achieves improved performance and smaller size and lighter weight through improvements in magnetic materials.
Compared to the conventional FL Series, the permeability at 100kHz is improved to 200% while maintaining the permeability at 10kHz and without lowering the resonance frequency.
In addition, the product size with equivalent performance at 100kHz can be reduced by 35 to 40%.
The switching frequency of power supplies and the control frequency of inverter power supplies tend to increase as the equipment becomes smaller and achieves more advanced features. In addition, there has been an increase in the number of devices that generate noise accompanying the advance of electronic control of automobiles and the spread of EVs and PHEVs.
Nippon Chemi-Con proposes the FL-V Series as an effective product for noise reduction of such equipment.
◆Samples and Mass Production
The FL-V Series was available as samples from April 2019, and mass production started in June 2019.
◆Product Appearance
◆Product Profile
- Operating temperature range: -40℃ to +130℃
- Rated voltage range: AC/DC 250 to 700V
- Rated current range: 3.5 to 39.0A
- Thermal endurance class: B (130℃)
◆Product Features
[Comparison with existing products - permeability frequency characteristics]
[Comparison with existing products - impedance frequency characteristics]
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Developed FL-W Series Iron-Based Nanocrystalline Common Mode Choke Coils with 50% Higher Permeability
- NIPPON CHEMI-CON Snap-in Type KVA Series Capacitators is AEC-Q200 Compliant with Endurance up to 105℃ 2000hrs
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con AEC-Q200 Compliant Snap-in Type KVB Series Aluminum Capacitators is Suitable for OBC
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- NIPPON CHEMI-CON Snap-in Type LVA Series Aluminum Capacitators, AEC-Q200 Compliant for OBC
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
