Synchronous DRAM Memory 256Mbit H57V2562GFR-xxI Series

PublishTime：2022-09-09

●The Hynix H57V2562GFR Synchronous DRAM is 268,435,456bit CMOS Synchronous DRAM, ideally suited for the consumer memory applications which requires large memory density and high bandwidth. It is organized as 4banks of 4,194,304 x 16 I/O.
Synchronous DRAM is a type of DRAM which operates in synchronization with input clock. The Hynix Synchronous DRAM latch each control signal at the rising edge of a basic input clock (CLK) and input/output data in synchronization with the input clock (CLK). The address lines are multiplexed with the Data Input/ Output signals on a multiplexed x16 Input/ Output bus. All the commands are latched in synchronization with the rising edge of CLK.
The Synchronous DRAM provides for programmable read or write Burst length of Programmable burst lengths: 1, 2, 4, 8 locations or full page. An AUTO PRECHARGE function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst access. The Synchronous DRAM uses an internal pipelined architecture to achieve high-speed operation. This architecture is compartible with the 2n rule of prefetch architectures, but it also allows the column address to be changed on every clock cycle to achieve a high-speed, fully random access. Precharging one bank while accessing one of the other three banks will hide the precharge cycles and provide seamless, high-speed, randon-access operation.
Read and write accesses to the Hynix Synchronous DRAM are burst oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence.
Accesses begin with the registration of an ACTIVE command, which is then followed by a READ or WRITE command.
The address bits registered coincident with the ACTIVE command are used to select the bank and the row to be accessed. The address bits registered coincident with the READ or WRITE command are used to select the bank and the starting column location for the burst access.
All inputs are LVTTL compatible. Devices will have a VDD and VDDQ supply of 3.3V (nominal).
●256Mb Synchronous DRAM(16M x 16) FEATURES
■Standard SDRAM Protocol
■Internal 4bank operation
■Power Supply Voltage : VDD = 3.3V, VDDQ = 3.3V
■All device pins are compatible with LVTTL interface
■Low Voltage interface to reduce I/O power
■8,192 Refresh cycles / 64ms
■Programmable CAS latency of 2 or 3
■Programmable Burst Length and Burst Type
▲ 1, 2, 4, 8 or full page for Sequential Burst
▲ 1, 2, 4 or 8 for Interleave Burst
■Industrial Temp : -40oC ~ 85oC Operation
■Package Type : 54ball, 0.8mm pitch FBGA
■This product is in compliance with the directive pertaining of RoHS.

Brand of Product：	SK HYNIX
Part#：	H57V2562GFR-xxI 、 H57V2562GFR 、 H57V2562GFR-60C 、 H57V2562GFR-75C 、 H57V2562GFR-60L 、 H57V2562GFR-75L 、 H57V2562GFR-XXJ More Part#
Product Category：	Hynix SDRAM Memory 、 Synchronous DRAM 、 CMOS Synchronous DRAM More
Application：	[ consumer memory applications ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：	54ball;0.8mm pitch FBGA
Language：	English Chinese Chinese and English Japanese
Date of Creation：	Aug. 2009
Version Number：	Rev 1.0
Data Encoding：
Data Size：	708 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 23 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

New Products & Solutions

More>

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits