PicoCOM™1.2 Computer on Module with NXP i.MX 6UL Processor
■PicoCOM™1.2 is another compact and inexpensive module in PicoCOM™ form factor.
■It is (as far as possible) pin compatible to PicoCOM™1. The PicoCOM™ form factor is perfectly suited for applications without display but many communication interfaces.
■PicoCOM™1.2 is based on a NXP Single Core applications processor of the very successful i.MX 6 series and includes a Cortex®-A7 core with 528MHz and security features.
■A large number of standardized interfaces enables a diverse application field to the user.
■The integrated operating system (WEC 2013 or Linux) supports all interfaces, so the user can easily realize his software application without deeper hardware knowledge
■A simple 3,3V power supply makes an easy design- in possible. Module and user hardware are connected via an 80poles plug connector. PicoCOM™1.2 is shipped with a pre-installed bootloader.
●Characteristics
■NXP i.MX 6UltraLite applications processor Cortex®-A7 – 528MHz
■Up to 1GB SLC NAND Flash, 512MB RAM
■Ethernet 10/ 100MBit
■Up to 6x Serial (5x RTS/CTS, 1x RXD/TXD)
■1x USB2.0 Host, 1x USB2.0 Device
■2x CAN2.0
■2x I²C, 2x SPI
■external SD-Card-Slot
■Audio (In/Out, analog)
■WEC 2013 or Linux
■3,3V Low Power Design (1W typ.)
■Extended temperature range (-25°C - +85°C)
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
August 2022 |
|
|
|
|
|
|
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
