efus™A9X Computer On Module with NXP i.MX 6SoloX
■efus™A9X is another compact and inexpensive module in efus™ form factor. It is perfectly suited for applications with numerous interfaces in medicine and industry. Along with the attribute of an easy baseboard (EasyLayout), efus™ has a size of 47x62mm only and is therefore suitable for compact housings. The low power loss of only 2 Watt (typ.) makes it easy to cool the module. efus™A9X is based on a NXP single-core applications processor from the very successful i.MX 6 series and has a Cortex®-A9, as well as a Cortex®-M4 core. Cortex®-M4 can be used for fast control and regulation functions or for processing fast interface protocols. SoloX is the second processor in NXP’s portfolio which supports Asymmetric Multiprocessing. Both cores (A9+M4) are connected to the internal bus fabric and have the possibility to access all peripherals.
■In addition to Vybrid, SoloX comes with Resource Domain Controller which makes it easier to protect memory or other peripherals from each other.
■Compared to other i.MX 6 application processors, SoloX offers much more bandwidth on the two GBit LAN interfaces.
■2D, 3D, NEON, FPU and OpenGL are available, ensuring software compatibility to other i.MX 6 applications processors. Another characteristic is the long-time availability to at least 2035. The customized operating system (WEC 2013/ WEC7 or Linux) supports all interfaces, guaranteeing an easy software development without a deeper understanding of hardware.
■Audio Codec as well as touch controller are found on the base board. WLAN and BT with chip antenna or antenna socket can be offered as well. Of course, efus™A9X is pin compatible to efus™A9.
●Characteristics
■NXP i.MX 6 SoloX applications processor Cortex®-A9 – 1GHz and Cortex®-M4 -200MHz
■GPU: GC400T 2D, 3D
■512MB NAND Flash, 2GB DDR3 RAM, 32GB eMMC
■LCD interface for TFT: RGB up to XGA resolution, 18Bit, LVDS up to WXGA resolution, 24Bit, optional 18 Bit LVDS via MXM2
■2x Ethernet 10/ 100/ 1000Mbit, PCIe
■1x USB 2.0 Host, 1x USB 2.0 Host/Device
■4x UART, 2x CAN 2.0, 2x I2C, 2x SPI
■2x SD Card Slot (external), Audio (I2S), GPIO, PWM
■Touch (4-wire and PCAP via I2C, external)
■Camera (Analog & Parallel), WLAN/BT (opt.)
■High Precision TXCO (opt.)
■Linux, WEC 2013/ WEC 7
■5V (2W typ.), 230Pin MXM2, 47 x 62mm
|
efus™A9X 、 efusA9X/ A9Xr2-V2-W13/ LIN 、 efusA9X/ A9Xr2-V4-W13/ LIN 、 efusA9X-V5-W13/-LIN 、 efusA9X-V8-W13 、 efusA9X-V9-LIN 、 efusA9X-V9.3-LIN 、 efusA9X-SKIT-LIN/ W13 、 efus™A9X-SKIT 、 efus™A9X-V4 、 efusA9X-V4-LIN/ W13 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
February 2024 |
|
|
|
|
|
|
|
|
469 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
