PicoCore™MX8MN Computer On Module with NXP i.MX 8M Nano
■The heterogeneous multi-core processor consists of up to four ARM® Cortex®-A53 cores (1.5GHz) and an additional Cortex®- M7 for real-time processing. Displays can be connected either via a MIPI-DSI interface (4 lanes) or via LVDS (2 channels). The maximum resolution is FullHD.
■The i.MX 8M Nano has OpenGL 2.1 / 3.0 / 3.1 and OpenCL 1.2. This unit offers enough performance for a modern user interface. In addition to Secure Boot (protection of the system against manipulation and protection of the software against decryption), an additional security chip (NXP A71CH Plug & Trust Secure Element) offers further security for IoT connections.
■The customer can program the certificates himself, alternatively F&S Elektronik Systeme offers this as a service.
■The PicoCore™ standard (35x40 mm) uses two connectors (Hirose DF40C) with 100 pins each. This enables a compact design and a small board-to-board distance (1.5-4mm). With the F&S project guarantee, F&S Elektronik Systeme accompanies customers from the start of the project to the successful completion of the project.
●Characteristics
■NXP i.MX 8M Nano ARM® Cortex®-A53 Solo/Dual/ Quad @1500MHz & ARM® Cortex®-M7 @650MHz
■TFT MIPI-DSI, alternative LVDS
■3D hardware acceleration
■Touch (4-wire/ PCAP Touch) via I2C
■up to 8GB DDR3L RAM,
■512MB SLC NAND Flash or 32GB eMMC
■Audio Line In/Out, Mic, Headphone or I2S
■USB 2.0 OTG, MIPI-CSI
■2x Gigabit Ethernet or RGMII
■2x SPI, 4x I2C, 4x Serial, CAN
■I/O, PWM, 2x SDIO (SD-Card), RTC
■5V with 2W typ.
■0°C - +70°C (-20°C/ -40°C - +85°C)
■2x 100pin, height 1.5mm up to 3mm
■Available up to minimum 2034
|
PicoCore™MX8MN 、 PicoCoreMX8MN-V1-LIN 、 PicoCoreMX8MN-V5-LIN 、 PicoCore™MX8MN-SKIT-LIN 、 PicoCore ™ MX8MN |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
May 2022 |
|
|
|
|
|
|
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
